Denon PMD330 ユーザーズマニュアル

3

n

Use a Phillips type screwdriver to adjust the analog balanced

output level.  Turn the screwdriver clockwise to increase the

output level, and turn the screwdriver counterclockwise to de-

crease the output level. (Min. level = -11 dBu)

- Do not use excessive force when turning the screwdriver.

- The output level and channel balance are adjusted when the

unit is shipped from the factory.  Do not change these adjust-

ments inadvertently.

m

Connect a device with analog balanced inputs to these jacks

through a cable with XLR connectors.

When connecting another device to this CD player through

these jacks, confirm that the pin assignments of the XLR con-

nectors match before making the connection.

If the pin assignments are different, change the connections

in the XLR connector cable so that the pin assignments match.

,

Connect a device with a digital balanced input to this jack through

a cable with XLR connectors.

The digital format output on this balanced connectors is SPDIF.

Most products that contain an XLR digital input are designed

to accept an AES/EBU format signal. Be aware that the AES/

EBU input on some products will not accept SPDIF, even

though the audio data is identical.

3  COLD(-)

2  HOT(+)

1  GND

1

3

2

z

These are the analog signal output jacks.  The red jack is the

right channel audio output, and the white jack is the left chan-

nel audio output jack.

 

Do not connect these jacks to the PHONO jacks on an ampli-

fier.

x

The digital signal from the compact disc that is being played is

output through this jack.

Connect a device with a digital input jack (such as recording

equipment, an amp, or a D/A converter) to this jack through a

RCA cable.

When outputting a digital signal from the PMD331/PMD340,

set “D.OUT” in the Preset menu to “On”.

For details on how to make this setting.

(See also page 17.)

c

An external switch connected to this  jack can be used to con-

trol disc pause and playback.

(See also page 19.)

On the PMD331/PMD340, this feature is in the CONTROL I/O

connector 

⁄0

.

(See also page18.)

v

When using an infrared remote control transmitter to control

this CD player, set this switch to 

“INT”.

 When incorporating this

CD player into a system by connecting this CD player (for re-

mote control) to equipment that is equipped with a RC5 com-

patible output, set this switch to 

“EXT”.

Please set to “EXT” when you are using this CD player with-

out a remote control. The CD player will then not be able to

receive signals from another infrared remote control transmit-

ter.

b

This CD player can be controlled remotely by connecting this

CD player via a remote control cable to other equipment that

support RC5.

XLR Connector Pin Assignments for this CD Player

If this CD player is to be connected to equipment that is

equipped with a RC5 remote control jack, be certain to connect

the 

“REMOTE CONTROL IN”

 jack on this unit with the

“REMOTE CONTROL OUT”

 jack on the other unit.

When this CD player is connected to a cassette recorder or a

disc recorder (CD-R, CD-RW, etc.), RC5 provides synchro re

cording capabilities. 

(See also page 15.)

* Refer to the figures on the pages at the back of this user’s guide. The callout numbers on the figures correspond to those found in

the text.