JVC MX-J555V ユーザーズマニュアル
4
English
AM antenna
1
Connect the AM loop antenna to the AM LOOP
terminals as illustrated.
terminals as illustrated.
2
Turn the AM loop antenna until you have the best
reception.
reception.
To connect an outdoor AM antenna
When reception is poor, connect a single vinyl-covered wire to the
AM EXT terminal and extend it horizontally. (The AM loop antenna
must remain connected.)
AM EXT terminal and extend it horizontally. (The AM loop antenna
must remain connected.)
For better reception of both FM and AM
• Make sure the antenna conductors do not touch any other
terminals and connecting cords.
• Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
FM
(75 )
ANTENNA
AM LOOP
FM
AM EXT
2
3
1
Vinyl-covered wire
(not supplied)
(not supplied)
AM loop antenna (supplied)
Connecting Speakers
You can connect a pair of front speakers and one subwoofer.
To connect front speakers
RIGHT
LEFT
SPEAKERS
1
2, 3
Speaker cord
Speaker cord
Red
Black
Left
speaker
Right
speaker
1
Press and hold the clamp of the speaker terminal
on the rear of the unit.
on the rear of the unit.
2
Insert the end of the speaker cord into the terminal.
Match the polarity of the speaker terminals: Red (+)
to red (+) and black (–) to black (–).
Match the polarity of the speaker terminals: Red (+)
to red (+) and black (–) to black (–).
3
Release the finger from the clamp.
IMPORTANT:
Use only speakers with the same speaker
impedance as indicated by the speaker terminals on the rear of
the unit.
the unit.
Continued
EN1-5;MX-J555V/PM6
7/8/99, 9:05 AM
4