Lenoxx Electronics CD-210 ユーザーズマニュアル

TROUBLESHOOTING

Problem

Remedy

The power is not on or the

POWER indicator lamp is dim.

Connect the AC power cord to a wall

outlet securely.

Make sure the batteries are inserted

correctly and they are fresh.

There is no sound.

Make sure the appropriate indicator

lamp is ON as you want.

Adjust the volume.

Unplug the headphones when listening

through speakers.

flashes in the display

even when a CD is in place.

Insert the CD with the label side up.

CD does not play.

Make sure that the CD compartment is

closed.

Place the CD with the label side up.

Clean the CD.

Take out the CD and leave the CD door

open for about an hour to dry moisture

condensation.

Make sure the CD indicator lamp is ON.

Clean the CD, or replace it if the CD is

badly damaged.

Place the player in a location free from

vibration.

Check if your batteries are fresh.

Check if the CD itself is damaged by playing

it in another set.

The sound is weak or has poor

quality.

Replace all the batteries with new ones if

they are weak, or bring the set near a

window, or rotate the set.

The RECORD button does not

function/The tape does not play.

Make sure the safety tab on the cassette

is in place.

Make sure the TAPE indicator lamp is ON.

Make sure the tape is not at the end. Press

REWIND then RECORD.

The tape does not erase

completely.

Clean the erasing head (see page 18).

Replace all the batteries with new ones if

they are weak.

The tape does not record.

Make sure the tape is inserted properly.

Make sure the safety tab of the cassette

is in place.

The sound is weak/The sound

quality is poor.

Clean the heads, pinch roller and capstan

(see page 18).

General

CD player

Radio

19

The sound drops out.

Tape player

Cassette PLAY button pops up.

The tape has reached its end. Remove it,

flip to the other side and re-insert. Or

press REWIND and PLAY to hear that side.