Lenoxx Electronics CD-511 ユーザーズマニュアル

ページ / 24
IB-CD511(TA)-SW-E-091002
TROUBLE SHOOTING
Problem
The power is not on.
•
Connect the AC power cord securely to a wall outlet.
•
Make sure the batteries are inserted correctly and
are not worn out.
There is no sound.
•
Make sure the FUNCTION switch is in the correct
position.
•
Adjust the volume.
•
Unplug the headphones when listening
through the speakers.
“
” appears in the display even
when a CD is in place.
•
Insert the CD with the label side up.
CD does not play.
•
Make sure that the CD compartment is closed.
•
Clean the CD.
•
Remove the CD and leave the CD DOOR open for
about an hour to get rid of moisture condensation.
•
Make sure the FUNCTION switch is in the CD position.
Sound is weak or sound quality is
poor.
•
Replace all the batteries with new ones if
they are low, move the player close to a
window for better MW reception or rotate it
for better FM reception.
The RECORD button does not
function/The tape does not play.
•
Make sure the safety tab on the cassette
is in place (see page 20).
•
Make sure the FUNCTION switch is in the
TAPE position.
The tape does not erase
completely.
•
 
Clean the erasing head (see page 21).
•
Replace all the batteries with new ones if they are
low.
The tape does not record.
•
Make sure the tape is inserted correctly.
•
Make sure the safety tab on the cassette is in place.
Sound is weak or sound quality is
poor.
•
Clean the heads, pinch roller and capstan
(see page 21).
General
CD player
Radio
Tape player
Cassette PLAY button pops up.
•
The tape has reached the end of one side. Remove,
turn over and re-insert.
22
VFD display does not light up.
•
You may be using battery power. The VFD display
will only light up when AC power is used.
Remedy
•
It is normal since the radio uses less power than
the CD player.
The sound drops out.
CD does not play while radio may
continue to play.
•
Clean the CD or replace it if it is badly damaged.
•
Place the player in a location free from vibrations.
•
Check that the batteries are not worn out.
Tape jamming or tangling
•
Use only better quality tapes.
•
Do not use a cassette with more than 90 minutes.
•
Make sure there are no loose layers of tape visible
before inserting the cassette.