McIntosh MCD301 ユーザーズマニュアル

5. The Text Display

Mode may be can-

celed by pressing the

DSP/TIME Push-but-

ton on the Remote

Control. Refer to figure 16.

6. One of the Track Time Modes may also be dis-

played instead of the Track Number, by pressing

the DSP/TIME Push-button on the Remote Con-

trol. Refer to figure

13. For additional

information on the

Time Display Modes

refer to “Display

Modes” on page 19.

How to Play a CD Disc

With a disc already loaded into the MCD301, press the

PLAY Push-button on the

Front Panel of the MCD301 or

Remote Control. Refer to figures

6, 14 and 16.

How to Pause a Disc

This feature allows for the temporary stopping of disc

playback. Refer to figures 6, 15

and 16.

1. When playing a Disc, press

the PAUSE Push-button to

temporarily stop playback.

2. Press the PLAY Push-button to resume playing the

disc.

Track Back

Return to the beginning of the Track currently playing

by rotating the MCD301 Front Panel TRACK BACK 

Control counterclockwise and then releasing the control

or momentarily pressing the BACK  Push-button on

the Remote Control. Rotate and hold the TRACK BACK


Control or press and hold the BACK  Push-button

for rapid selection of the desired previous Tracks. Refer to

figures 6 and 16.

Track Next

Advance to the next Track by rotating the MCD301 Front

Panel TRACK NEXT  Control clockwise and then re-

leasing the control or momentarily pressing the NEXT 

Push-button on the Remote Control. Rotate and hold the

TRACK NEXT  Control or press and hold the NEXT


Push-button for rapid selection of the next desired

Track. Refer to figures 6 and 16.

How to Operate the MCD301

Fast Forward or Reverse

Using the Remote Control, press the

FF (Fast Forward)



or REV (Re-

verse)



Push-button to search back

and forth rapidly through a Track on

a disc. To return to normal playback

release the same FF (Fast Forward)



or REV (Reverse)



Push-button.

Refer to figure 16.

Stop Mode

Press the STOP Push-button at

any time to stop Playback. To listen

to the disc again, press the PLAY

Push-button and playback will start

from the beginning of the disc.

Volume Level

The MCD301 has both Fixed and

Variable Output Level Connections.

The Variable Output Level Connec-

tions (Rear Panel and Front Panel

Headphone Jack) are controlled by

the Front Panel Level Control and the

LEVEL Push-buttons on the Remote

Control. Refer to figures 6, 16 and

17. The Front Panel Volume Level

Information Display will indicate the

Volume Level from 0 - 100%.

Note: When the Volume Level is 81%, the

Rear Panel Variable Outputs will be

at the same volume level as the Fixed

Outputs.

Mute

Press the MUTE Push-button to mute the audio (-50dB

down in level) at both the Fixed and Variable Output Con-

nections on the Rear Panel. Refer to figure 6. The LED

above the MUTE Push-button will illuminate. Pressing the

MUTE Push-button a second time restores the audio at the

output connections and the LED will no longer be illumi-

nated.

Note: The Headphone Jack is not affected by the Mute

Function.

Direct Track Selection

The MCD301 Front Panel Display indicates the Disc Track

currently playing. Use the Remote Control NUMERIC

Push-button(s) to enter the desired Track Number. Refer

to pages 14 and 15 for additional information using the

Remote Control.

Figure 16

Figure 12

0 3 : S O N I

Figure 13

0 2 : 3 6

Figure 15

0 2 : 4 6

Figure 17

8 1 %

LEVEL

Figure 14

0 2 : 1 3