Juniper AX411 AX411-E データシート
製品コード
AX411-E
2
Features and Benefits
• Easy to install and expand
- Automatic access point cluster cloning*
- Configuration on connect
• Ease to operate and manage
- Remote packet capture*
- Wireless PHY security integrated with Juniper zone-based
security
• Excellent end user experience and security
- End-to-end wireless QoS treatment for simplified low latency
application support
- Multiple SSID support for different security and application
needs
* Features supported in the future
Specifications
Draft 802.11n 2.0 capabilities
• 2x3 multiple-input multiple-output (MIMO) with two spatial
streams
• Maximal-ratio combining (MRC)
• 20 MHz and 40 MHz channels
• PHY data rates up to 300 Mbps
• Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
• Space-time block code (STBC) range enhancement support
• Reduced active power consumption (< 2.5 W per radio)
• 20 MHz and 40 MHz channels
• PHY data rates up to 300 Mbps
• Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
• Space-time block code (STBC) range enhancement support
• Reduced active power consumption (< 2.5 W per radio)
Data rates
• 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
• 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
• 802.11n:
• 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
• 802.11n:
- 6.5, 13.5, 7.2, 15 Mbps
- 13, 27, 14.4, 30 Mbps
- 19.5, 40.5, 21.7, 45 Mbps
- 26, 54, 28.9, 60 Mbps
- 39, 8,1 43.3, 90 Mbps
- 52, 108, 57.8, 120 Mbps
- 58.5, 121.5, 65, 135 Mbps
- 65, 135, 72.2, 150 Mbps
- 13, 27, 14.4, 30 Mbps
- 26, 54, 28.9, 60 Mbps
- 39, 81, 43.3, 90 Mbps
- 52, 108, 57.8, 120 Mbps
- 78, 162, 86.7, 180 Mbps
- 104, 216, 115.6, 240 Mbps
- 117, 243, 130, 270 Mbps
- 130, 270, 144.4, 300 Mbps
Antenna connector
• 3 x reverse polarity SMA (RPSMA)
Tx power capabilities
• TX power out B mode @ 11 Mbps: 20 dBm +/- 2
• TX power out G mode @ 54 Mbps: 18 dBm +/- 2
• TX power 11n mode @ 2.4 GHz (per chain): 16 dBm +/-2
• TX power out A mode @ 54 Mbps: 14 dBm +/- 2
• TX power 11n mode @ 5 GHz (per chain): 13 dBm +/- 2
• TX power out G mode @ 54 Mbps: 18 dBm +/- 2
• TX power 11n mode @ 2.4 GHz (per chain): 16 dBm +/-2
• TX power out A mode @ 54 Mbps: 14 dBm +/- 2
• TX power 11n mode @ 5 GHz (per chain): 13 dBm +/- 2
RX power capabilities
RX sensitivity (8%
PER) 11b mode
@ different data
rates
PER) 11b mode
@ different data
rates
1 Mbps: -96 dBm
2 Mbps: -93 dBm
5.5 Mbps: -91dBm
11 Mbps: -88 dBm
2 Mbps: -93 dBm
5.5 Mbps: -91dBm
11 Mbps: -88 dBm
RX sensitivity
(10% PER) 11g
mode @ different
data rates
(10% PER) 11g
mode @ different
data rates
6 Mbps: -90 dBm, 9 Mbs: -89 dBm
12 Mbps: -89 dBm, 18 Mbps: -86 dBm
24 Mbps: -83 dBm, 36 Mbps: -79 dBm
48 Mbps: -75 dBm, 54 Mbps: -74 dBm
Note that these numbers are without using external
low-noise amplifier (LNA). With external LNA, the Rx
sensitivity numbers improve by 1 to 2 dBm.
12 Mbps: -89 dBm, 18 Mbps: -86 dBm
24 Mbps: -83 dBm, 36 Mbps: -79 dBm
48 Mbps: -75 dBm, 54 Mbps: -74 dBm
Note that these numbers are without using external
low-noise amplifier (LNA). With external LNA, the Rx
sensitivity numbers improve by 1 to 2 dBm.
RX sensitivity
(10% PER)
11n modes
(10% PER)
11n modes
BAND
RATE/BW
SENSITIVITY
(DBM)
(DBM)
2.4 GHz
1
-96
2.4 GHz
11
-88
2.4 GHz
6
-90
2.4 GHz
54
-74
2.4 GHz
mo/20 MHz
-86
2.4 GHz
mo/40 MHz
-83
2.4 GHz
m15/20 MHz
-67
2.4 GHz
m15/40 MHz
-66
5 GHz
6
-89
5 GHz
54
-73
5 GHz
mo/20 MHz
-85
5 GHz
mo/40 MHz
-82
5 GHz
m15/20 MHz
-64
Antenna
Specification
Specification
Frequency range: 2.4-2.5 GHz/5.15-5.875 GHz
Gain:
2.4-2.5 GHz, Gain = 3 dBi
5.15-5.875 GHz, Gain = 5 dBi
VSWR: VSWR < 2
Polarization: linear, vertical
Half-power beam width (HPBW)/horizontal: 360°
HPBW/vertical: 78°
Maximum power rating: 2 W (CW)
Impedance: 50 ohms (typical)
Gain:
2.4-2.5 GHz, Gain = 3 dBi
5.15-5.875 GHz, Gain = 5 dBi
VSWR: VSWR < 2
Polarization: linear, vertical
Half-power beam width (HPBW)/horizontal: 360°
HPBW/vertical: 78°
Maximum power rating: 2 W (CW)
Impedance: 50 ohms (typical)
Interfaces
• 10/100/1000 Ethernet port
• Serial console port
• Optional power supply
• Locking connector
• Serial console port
• Optional power supply
• Locking connector
Management
• Junos OS CLI, J-Web
• Network and Security Manager
• Network and Security Manager
Indicators
• Power LED: Indicating power status of AX411
• Status LED: Indicating AX411 operational status
• Radio 1 LED: Indicating activity on 2.4 GHz radio
• Radio 2 LED: Indicating activity on 5 GHz radio
• Status LED: Indicating AX411 operational status
• Radio 1 LED: Indicating activity on 2.4 GHz radio
• Radio 2 LED: Indicating activity on 5 GHz radio
Dimensions
• 9.5 x 5.8 x 1.9 in (242 x 147 x 48 mm)
AX411 WIRELESS LAN ACCESS POINT