Moen 4625 series プリント
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
NOTE:THIS FAUCET IS DESIGNED TO BE
INSTALLED THRU 3-1" DIA. HOLES, 2" ON CENTER
CHATEAU®
Single-Handle Lavatory Faucet
with Metal Waste Assembly
Model: 4625 series
Bulk Pack (12 Per Carton):
64624 series
with 50/50 Waste Assembly
Bulk Pack (12 Per Carton):
64625 series
Less Waste
Bulk Pack (12 Per Carton):
64600 series
SPACER
PROVIDED –
DISCARD IF
MOUNTING
SURFACE IS
MORE THAN
3/4" THICK
PROVIDED –
DISCARD IF
MOUNTING
SURFACE IS
MORE THAN
3/4" THICK
1-3/4"
(45mm)
MAX.
DECK PLATE
Lift
Rod
TOP OF
MOUNTING
SURFACE
2-3/8"
(?mm)
(?mm)
ESC.
WIDTH
6-7/54" (156mm)
ESCUTCHEON WIDTH
2"
(51mm)
4-3/8"
(111mm)
5-1/4" (133mm)
OPEN POSITION
2"
(51mm)
3/8" X 16"
TUBING SUPPLIES
2"
(51mm)
Rev. 6/08
There is more than 1 version of this model.
Page down to identify the version you have.
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 16" supplies
• Includes metal pop-up type waste assembly
OPERATION
• Acrylic knob style handle
• Pull-on/Push-off
• Temperature controlled through 180˚ degree arc
• Metal construction with various finishes identified by suffix
• 16" supplies
• Includes metal pop-up type waste assembly
OPERATION
• Acrylic knob style handle
• Pull-on/Push-off
• Temperature controlled through 180˚ degree arc
of handle travel
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
for products made before October 2008 flow is limited to
2.2 gpm max (8.3 L/min)
2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1225 cartridge design
• Nonmetallic/nonferrous and stainless steel material
• Can accommodate reversed piping and back to back
• 1225 cartridge design
• Nonmetallic/nonferrous and stainless steel material
• Can accommodate reversed piping and back to back
installations
STANDARDS
• Third party certified to WaterSense,® CSA B-125, ASME
• Third party certified to WaterSense,® CSA B-125, ASME
A112.18.1M and all applicable requirements referenced therein
• Certified to ANSI/NSF 61/9
• Complies with California Proposition 65 and with
• Complies with California Proposition 65 and with
the Federal Safe Water Drinking Act
WARRANTY
• Lifetime limited warranty against leaks, drips and
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations