ENCORE 16-Port 10/100 Fast Ethernet Switch ENH916P-NWY プリント

This equipment has been tested and found to comply with the limits for a Class A digital 

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference when the equipment is operated in a 

commercial environment. This equipment generates, uses, and can radiate radio 

frequency energy, and if it is not installed and used in accordance with the instruction 

manual, it may cause harmful interference to radio communications. Operation of this 

equipment in a residential area is likely to cause harmful interference, in which case the 

user will be required to correct the interference at his own expense

*Shielded interface cables must be used in order to comply with emission limits

Changes or modifications to the equipment, which are not approved by the party

responsible for compliance could affect the user's authority to operate the equipment.

Copyright _ 1999 All Rights Reserved.

Company has an on-going policy of upgrading its products and it may be possible

that information in this document is not up-to-date.

Please check with your local distributors for the latest information.

No part of this document can be copied or reproduced in any form without written

consent from the company.

The device is a powerful, high-performance Fast Ethernet switch, with all 16 ports 

capable of 10 or 100Mbps auto-negotiation operation (Nway) which means the switch 

could automatically negotiate with the connected partners on the network speed and 

duplex mode. It is ideal for micro-segmenting large networks into smaller, connected 

subnets for improved performance, enabling the bandwidth demanding multimedia and 

imaging applications. Moreover, the 10/100Mbps auto-sensing ability provides an easy 

way to migrate 10Mbps to 100Mbps network with no pain. Compared to the shared 

10Mbps or 100Mbps networks, the Ethernet Switch delivers a dedicated 10/100Mbps 

connection to every attached client with no bandwidth congestion issue. 

Complies with 10BASE-T specifications of the IEEE802.3 standard

Complies with 100BASE-TX specifications of the IEEE802.3u standard

RJ-45 ports for 100Base-TX and 10Base-T connectivity

Supports Nway protocol for speed (10/100Mbps) and duplex mode

 (Half/Full) auto-detection

Supports full and half duplex operation on all ports

Supports back-pressure (half duplex) and flow control (IEEE802.3x)

Wire speed packet filtering and forwarding rate

Store-and-forward architecture filters fragment & CRC error packets

Supports extensive LED indicators for network diagnostics

External power adapter

Supports MDI/MDI-X auto crossover

Plug the circle end of the power adapter firmly into the power port on the switch rear 

panel, and the other end into an electric service outlet, then the system is ready.

The switch features auto-MDI/MDIX crossover detection function and provides plug-and-

play capability.  Users can immediately use any of the features of this product simply by 

plugging the network cables (RJ-45) into the computers and the switch.

All Ports can be used as an uplink port for connecting to another unit without using 

crossover cable. When using the uplink port, you can extend the distance to 100m for 

linking another switch or hub.

Use only the AC power adapter that came with the switch to prevent damage to the unit

Never stack units more than eight high if freestanding

Do not place objects on top of any unit or stack

Do not obstruct any vents at the sides of the case

Ports 1x - 16x :The switch has sixteen 10/100Mbps RJ-45 ports where you can connect 

computers or network devices to the switch.

AC IN : This port connects the AC power adapter.

All trade names and trademarks are the properties of their respective companies. 

16 port 10/100Mbps Ethernet Switch

AC power adapter

Quick installation guide

After installing the switch, you can check its status from the LED indicators on the front 

panel shown below.

POWER (PWR)   GREEN   ON  

The switch is power on

            

 

OFF  

The switch is power off

LINK / ACT   

GREEN   ON  

A link is established

   

 

BLINKING  

A link is established and data is being 

transmitted or received

PN 2042070000011

[]

[]

5x

4x

3x

2x

1x

15x

14x

13x

12x

11x

10x

9x

8x

7x

6x

AC IN

16x