Clarion DXZ725 ユーザーズマニュアル
14
DXZ725
English
Setting the Beat EQ
This unit are provided with 5 types of sound tone ef-
fects stored in memory. Select the one you prefer.
fects stored in memory. Select the one you prefer.
∗
The factory default setting is “USER CUSTOM”.
Each time you press the [BEQ] button, the tone
effect changes in the following order:
effect changes in the following order:
“BASS BOOST”
➜
“IMPACT”
➜
“EXCITE”
➜
“USER CUSTOM”
➜
“TONE BYPASS”
➜
“BASS BOOST” ...
• BASS BOOST
: bass emphasized
• IMPACT
: bass and treble empha-
sized
• EXCITE
: bass and treble empha-
sized mid de-emphasized
• USER CUSTOM : user custom
• TONE BYPASS
: no sound effect
Adjusting the tone
Press the [A] button and select the item to ad-
just. Each time you press the [A] button, the
item changes in the following order:
just. Each time you press the [A] button, the
item changes in the following order:
●
When “BASS BOOST” is set
“NON-FAD VOL”
➜
“BASS BOOST”
➜
“BALANCE”
➜
“FADER”
➜
Last function
mode.
●
When “IMPACT” is set
“NON-FAD VOL”
➜
“IMPACT”
➜
“BAL-
ANCE”
➜
“FADER”
➜
Last function mode.
●
When “EXCITE” is set
“NON-FAD VOL”
➜
“EXCITE”
➜
“BAL-
ANCE”
➜
“FADER”
➜
Last function mode.
●
When “USER CUSTOM” is set
“NON-FAD VOL”
➜
“BASS <GAIN>”
➜
“MID
<GAIN>”
➜
“TREB<GAIN>”
➜
“BALANCE”
➜
“FADER”
➜
Last function mode.
●
When “TONE BYPASS” is set
“NON-FAD VOL”
➜
“BALANCE”
➜
“FADER”
➜
Last function mode.
∗
Pressing the [BEQ] button for 1 second or longer
while in “USER CUSTOM” sets flat, and displays
a “BEQ FLAT” message.
while in “USER CUSTOM” sets flat, and displays
a “BEQ FLAT” message.
Note:
• When the separately-sold digital sound processor
• When the separately-sold digital sound processor
(DPH910) is used, the bass and treble tone ad-
justments cannot be made. To adjust the tone, re-
fer to the section “DSP Operations”.
justments cannot be made. To adjust the tone, re-
fer to the section “DSP Operations”.
Adjusting the non fader output
volume
volume
You can adjust the volume output from the unit’s
non fader output terminal.
non fader output terminal.
1. Press the [A] button and select “NON-FAD
VOL”.
2. Turning the [ROTARY] knob clockwise in-
creases the output volume; turning it counter-
clockwise decreases the output volume.
clockwise decreases the output volume.
∗
The factory default setting is “0”. (Setting
range: –6 to 6)
range: –6 to 6)
3. When the adjustment is complete, press the
[A] button several times until the function
mode is reached.
mode is reached.
Adjusting the bass
The bass gain, bass F (center frequency) and
bass Q can be adjusted as follows.
bass Q can be adjusted as follows.
1. Press the [A] button and select “BASS
<GAIN>”.
2. Press the [
a
] or [
d
] button and select from
“BASS <GAIN>”
➜
“BASS <F 50>”
➜
“BASS <Q 1>”
➜
“BASS <GAIN>”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise as needed and adjust the gain,
the F (center frequency) and the Q.
the F (center frequency) and the Q.
BASS GAIN : –6 to 8 (The factory default
setting is “0”)
BASS F :
50Hz/80Hz/120Hz (The fac-
tory default setting is “50”)
tory default setting is “50”)
BASS Q :
1/1.25/1.5/2 (The factory de-
fault setting is “1”)
fault setting is “1”)
4. When the adjustment is complete, press the
[A] button several times until the function
mode is reached.
mode is reached.
Adjusting the MID
The MID gain, MID F (center frequency) and
MID Q can be adjusted as follows.
MID Q can be adjusted as follows.
1. Press the [A] button and select “MID
<GAIN>“.
2. Press the [
a
] or [
d
] button and select from
“MID <GAIN>”
➜
“MID <F 1k>”
➜
“MID <Q
2>”
➜
“MID <GAIN>”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise as needed and adjust the gain,
the F (center frequency) and the Q.
the F (center frequency) and the Q.
MID GAIN :
–6 to 6 (The factory default
setting is “0”)
setting is “0”)
Basic Operations