Tascam D01240420A ユーザーズマニュアル

  To stop playback, press the STOP (H) key.

resume playback, press the PAUSE key again, or press the 
PLAY (h or y) key.

While playback is paused, pressing the PLAY key whose direction 
is opposite to the indicator (h or y) on the display, will switch 
the playback direction. This does not release the pause function. 
Press  PAUSE or the same play key (h or y) again to start 
playback on the other side of the tape.

Press the m or , key while in stop mode to fast wind the 
tape.

To stop the fast winding tape, press the STOP (H) key.

  Tape counter
Press the COUNTER RESET key to reset the tape counter to 

0 0 0 0

. You can use this function for easy relocation of any 

desired point on the tape.

  Pitch control (TAPE 1 deck only)
This control varies the pitch of the music during playback (This 

control does not work during recording or dubbing).

Turning the PITCH CONTROL knob clockwise increases the 
playback speed and raises the pitch up to +10%.
Turning the PITCH CONTROL knob counterclockwise reduces 
the playback speed and lowers the pitch by a maximum of −10%.

There is no level control for the headphones output. Beware that 
sudden loud sounds may occur depending on recorded material. 
You should avoid prolonged exposure to high volume sound as 
this can damage your hearing.

Plug your headphones into the PHONES jack, and put on the 
headphones.

Plugging into the PHONES jack does not disable the ANALOG 
OUTPUT.