Eureka 4650 ユーザーズマニュアル
Motor will not start.
Electric Plug
Push plug securely into outlet.
Try another outlet.
Check circuit breaker.
Try another outlet.
Check circuit breaker.
Motor suddenly stops.
Thermal Cut Off
Refer to page 7.
Does not clean the carpet
Filters
Clean or replace the filter(s). Hint: If picking up fine
or floor.
dust, the filter may not look dirty but a fine substance
tends to reduce suction when it blocks the airflow
through the filter(s).
tends to reduce suction when it blocks the airflow
through the filter(s).
Cyclonic Dust Cup
Be sure hose button lock is secure.
Be sure the cyclonic dust cup is properly seated into the
cassette body. See page 10.
cassette body. See page 10.
Empty cyclonic dust cup. See page 11.
Belt
Replace a cut, loose or out of shape belt.
Belt Cap
Snap the belt cap inside the hood if it comes loose.
Brush Roll
Clean hair and thread from bristles and end cap area.
Replace brush roll if bristles are worn.
Replace brush roll if bristles are worn.
Hose
Remove any clogs from the hose that restrict the airflow.
Check short hose in the base and long hose. Refer to
page 13.
Check short hose in the base and long hose. Refer to
page 13.
No suction at the end of hose.
Hose Adapter
Be sure button lock on hose adapter is secure.
Filter(s)
Clean or replace the filter(s). Hint: If picking up fine
dust, the filter may not look dirty, but a fine substance
tends to reduce suction when it blocks the airflow
through the filter(s).
dust, the filter may not look dirty, but a fine substance
tends to reduce suction when it blocks the airflow
through the filter(s).
Hose
Remove any clogs from the hose that restrict the
airflow. Check short hose in the base and long
hose. Refer to page 13.
airflow. Check short hose in the base and long
hose. Refer to page 13.
Headlight not working.
Light Bulb
Replace light bulb.
Noise from the brush roll
Brush Roll
Remove hood and clean debris or items from the brush
area.
roll area.
Belt
Replace a cut, loose or out of shape belt.
Cleaner is hard to push.
Cleaner Height Setting
Put handle in operating position. Tilt the cleaner back
to raise the front wheels off floor. Then turn the knob to
a higher setting.
to raise the front wheels off floor. Then turn the knob to
a higher setting.
Belt
Replace a cut, loose or out of shape belt.
Cleaner height knob will
Cleaner Height
Hint: Put handle in operating position. Tilt the
not turn.
Setting
cleaner back to raise the front wheels off floor.
Then turn the knob.
Then turn the knob.
Dirt Alert red light will not go off.
New carpet fibers.
Over time loose new carpet fibers will diminish and will
not trip the dirt alert sensors.
not trip the dirt alert sensors.
Dirt Alert red light will not come
Dirt sensor is not working.
Call 1-800-282-2886 7 a.m. to 8 p.m. central standard
on.
time, Monday through Saturday for the nearest authorized
Eureka service center.
Eureka service center.
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
PROBLEM SOLVING
NOTE: Turn off the switch and unplug the electrical cord before servicing.
PROBLEM
CAUSE
SOLUTION
3
3
3
3
3
17