Electrolux 864015 プリント

ページ / 2
Electrolux Dishwashing
Demineralization Filters
The Electrolux dishwashing range is produced for customers with the highest conceivable demands in 
efficient, economic and ergonomic dishwashing operations. The product range is comprised of glasswashers, 
pot and pan washers, undercounter, hood type, rack type and flight type dishwashers. The demineralization 
filters described on this sheet are suited for installations where high quality rinsing and spot-free drying and 
low operational costs are required. They have been specifically designed to be used with our glasswashers, 
undercounter and hood type machines. Thanks to the demineralization technology, all the impurities (salt, 
particles and bacteria) contained in the water are completely removed, eliminating any deposit on the 
glassware and silverware, thus guaranteeing shiny and spot-free results.
400007
EASY TO INSTALL
• The demineralization filters treats 
the water before it feeds into the 
dishwasher.
• The demineralization filters (both 
partial and total) can be used with 
a water temperature up to 60°C.
• Operating pressure is between 2 
and 6 bars.
• Nominal flow rate is 300 l/h.
• Depending on the water quality, 
partial or total demineralization 
has to be installed: partial 
demineralization filters remove 
mainly carbonate hardness 
(temporary hardness) and is 
recommended when [total 
hardness – temporary hardness] < 
5 dH (9fH); total demineralization 
filters remove all the salts and is 
recommended when [total 
hardness – temporary hardness] > 
5 dH (9fH).
EASY TO USE
• In the partial demineralization 
filter (BRITA PURITY 1200 Clean) 
calcium and magnesium ions are 
selectively removed from the 
drinking water via an ion 
exchanger. This prevents residues 
on the dishes during drying due to 
carbonate hardness and scale 
deposits on important machine 
parts. This means that the 
dishwashers have a greatly 
increased service life.