GE 215c1002p004-4 ユーザーズマニュアル

12

The ppm of chlorine in your 

If the water supply contains more than 2.0 ppm of chlorine, 

water supply exceeds maximum 

additional filtering of the water supply to the Reverse 

limits and has destroyed the 

Osmosis is needed. Correct this condition before doing

Reverse Osmosis membrane.

maintenance on the Reverse Osmosis system.

The prefilter is no longer

Replace the Reverse Osmosis membrane cartridge, 

removing chlorine from

control, screen, prefilter, postfilter and batteries in the

the water supply.

electronics box.

High quality product water

This is normal.

may have a different taste 
than what you’re used to.

Low water usage

Completely drain system and allow to refill.

Contamination in product 

Use sanitizing procedures. 

water storage.

Prefilter and postfilter 

Replace the prefilter and postfilter. 

need to be changed.

Drain side of faucet air gap 

Inspect and eliminate restriction or plug. It is important 

(3/8

² tubing) plugged, restricted

that there are no dips, loops or low spots in the drain line 

or incorrectly connected to the

from the faucet air gap to the drain pipe. Refer to 

drain point.

Installation Instructions for proper drain connection. If 

drain line adapter was used as the drain point, periodic 

inspection/cleaning is recommended.

This is normal.

Water flow rate will be lower than your regular faucet.

Water supply to the Reverse 

Increase water pressure, precondition the water, etc., as 

Osmosis system not within

needed to conform before doing maintenance on the 

specifications.

Reverse Osmosis system.

Prefilter cartridge plugged

Replace the prefilter. If rate does not increase, replace the 

with sediments and/or the

postfilter, Reverse Osmosis cartridge, flow control, screen 

Reverse Osmosis cartridge

and batteries in the electronics box.

plugged with sediments.