Yamaha RX-A2010 ユーザーズマニュアル
En
108
Network
IP Address
Configures the network parameters (IP address, etc).
Network Standby
Selects whether or not to turn on this unit by the command from other network devices.
MAC Address Filter
Sets the MAC address filter to limit access to this unit from other network devices.
Multi Zone
Zone2 Set
Zone3 Set
Zone3 Set
Volume
Enables/disables volume adjustments for Zone2 or Zone3 output.
Max Volume
Sets the Zone2 or Zone3 maximum volume so that sound is not too loud.
Initial Volume
Sets the Zone2 or Zone3 initial volume for when this unit is turned on.
Mono
Switches between stereo and monaural for Zone2 or Zone3 output.
Monitor Out Assign
Select the zone for which the MONITOR OUT/ZONE OUT jacks are used.
Party Mode Set
Enables/disables switching to the party mode for each zone.
Zone Scene Rename
Changes the scene names (for Zone2 or Zone3) displayed on the front display or TV screen.
Zone Rename
Changes the zone names displayed on the front display or TV screen.
Function
Auto Power Down
Sets the amount of time for auto-standby.
Input Assignment
Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source.
Display Set
Front Panel Display
Dimmer
Adjusts the brightness of the front display.
Scroll
Sets the scrolling manner of the front display.
Short Message
Selects whether to display short messages on the TV screen when this unit is operated.
Wall Paper
Selects a wall paper displayed on the TV.
Trigger Output1
Trigger Output2
Trigger Output2
Trigger Mode
Specifies the condition for the TRIGGER OUT jack to function.
Target Zone
Specifies the zone with which the TRIGGER OUT jack functions synchronized.
Target Source
Specifies the output level of the electronic signal transmitted with each input switching.
Manual
Switches the output level for electronic signal transmission manually.
Memory Guard
Prevents accidental changes to the settings.
Language
Select an on-screen menu language.
Menu
Item
Function
Page