Yamaha RX-A2010 ユーザーズマニュアル

En

❑ Subwoofer 1, Subwoofer 2

Selects whether or not subwoofer is connected to the SUBWOOFER 1 or 
SUBWOOFER 2 jack and its phase.

• When the bass sound is lacking or unclear, switch the subwoofer phase.

❑ SWFR Layout

Selects a subwoofer layout when 2 subwoofers are used.

• This setting is not available when “Subwoofer 1” or “Subwoofer 2” is set to “None”.

❑ Extra Bass

Sets the speakers to produce the front channel low-frequency components.

• This setting is not available when both “Subwoofer 1” and “Subwoofer 2” are set to “None”, or “Front” is set 

to “Small”.

■ 

Sets the distance between each speaker and listening position so that sounds from the 
speakers reach the listening position at the same time. First, select the unit of distance 
from “Meter” or “Feet”.

Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front
Presence L, Front Presence R, Rear Presence L, Rear Presence R, Subwoofer 1, Subwoofer 2

Setting range
0.30m ~ 24.00m (1.0ft ~ 80.0ft) *0.05m (0.2ft) steps

Default
3.00m (10.0ft)

■ 

Adjusts the volume of each speaker.

Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front
Presence L, Front Presence R, Rear Presence L, Rear Presence R, Subwoofer 1, Subwoofer 2

Setting range
-10.0dB ~ +10.0dB (0.5dB steps)

Default
0.0dB

Adjusting while viewing the front display

a Press LEVEL.
b Use the cursor keys ( / ) to select a speaker.
c Use the cursor keys ( / ) to adjust the volume of the selected speaker.

Use

Normal 
(default)

Select this when a subwoofer is connected to the SUBWOOFER 1 or 
SUBWOOFER 2 jack (not to reverse the phase). The subwoofer will 
produce LFE (low-frequency effect) channel audio and low-frequency 
components from other channels.

Reverse

Select this when a subwoofer is connected to the SUBWOOFER 1 or 
SUBWOOFER 2 jack (reverse the phase). The subwoofer will produce 
LFE (low-frequency effect) channel audio and low-frequency 
components from other channels.

None

Select this when no subwoofer is connected to the SUBWOOFER 1 or 
SUBWOOFER 2 jack. The front speakers will produce LFE (low-
frequency effect) channel audio and low-frequency components from 
other channels when both “Subwoofer 1” and “Subwoofer 2” are set 
to “None”.

Left + Right

Select this when 2 subwoofers are placed on the left and right sides of 
the room.

Front + Rear

Select this when 2 subwoofers are placed on the front and rear sides of 
the room.

Monaural x2 
(default)

Select this when 2 subwoofers are placed freely.

Off (default)

Depending on the size of the front speakers, either the subwoofer or 
front speakers produce the front channel low-frequency components.

On

Both the front speakers and subwoofer produce the front channel low-
frequency components.