Yamaha RX-V361 ユーザーズマニュアル

Press Gn to select “SET” and then Gl / h 
to select the desired setting.

SET  >CANCEL

Choices: SET, CANCEL
• Select “SET” to apply the settings you made.
• Select “CANCEL” to cancel the setup procedure 

without making any changes.

y

You can also press PMENU to cancel the setup procedure.

Press G

ENTER to confirm your selection.

If you selected “SET” in step 7, each speaker outputs 
a test tone twice in turn. “CHECK:TestTone” appears 
in the front panel display for a few seconds and then 
“CHECK OK?” appears in the front panel display.

y

• Check the speaker connections (see page 5) and adjust the 

“SPEAKERS” settings back in step 6, if necessary.

• The indicator of the speaker currently outputting the test 

tone flashes in the front panel display.

Gl / h to select the desired setting.

Choices: YES, NO
• Select “YES” to complete the setup procedure if 

the test tone levels from each speaker were 
satisfactory.

• Select “NO” to proceed to the speaker level 

adjustment menu to balance the output level of 
each speaker.

Press G

ENTER to confirm your selection.

• If you selected “YES” in step 9, the setup 

procedure is completed and the display returns to 
the top set menu display.

• If you selected “NO” in step 9, the front speaker 

level adjustment display appears in the front panel 
display.

Gk / n to select a speaker and then 

Gl / h to adjust the balance.
The selected speaker and the front left speaker (or the 
surround left speaker) output a test tone in turn.
• Press h to increase the value.
• Press l to decrease the value.

  FR ----||----

• Select “FR” to adjust the balance between the front 

left and right speakers.

• Select “C” to adjust the balance between the front 

left and center speakers.

• Select “SL” to adjust the balance between the front 

left and surround left speakers.

• Select “SR” to adjust the balance between the 

surround left and surround right speakers.

• Select “SW” to adjust the balance between the 

front left speaker and the subwoofer.

The available speaker channels differ depending on the 
setting of the speakers.

Press P

MENU to exit from “BASIC SETUP”.

CHECK:TestTone

CHECK OK?  

..YES