Yamaha RX-V661 ユーザーズマニュアル

Rotate the I

INPUT selector to select the 

• Select “TUNER” as the input source to use the TUNER 

features in Zone 2. For details about the TUNER 
operations, see “FM/AM tuning” on page 50.

• Select “XM” as the input source to use the XM 

Satellite Radio features in Zone 2. For details about the 
XM Satellite Radio operations, see “XM Satellite 
Radio tuning” on page 53.

• Select “V-AUX” as the input source to use iPod 

features in Zone 2. For details about the iPod 
operations, see “Using iPod™” on page 58.

Press 8

ZONE 2 ON/OFF to set Zone 2 to the 

■ Setting the remote control to the Zone 2 

The remote control is originally set to the main mode to 
control the main zone. To control Zone 2 with the remote 
control, you must first set the remote control to the Zone 2 
mode.

Press U

CODE SET using a ballpoint pen or 

The VTRANSMIT indicator on the remote control 
flashes twice.

Press the numeric buttons (B) to enter the 
code number “9992”.

■ Controlling Zone 2 with the remote 

Press and hold H

POWER or GSTANDBY and 

then press A

• Press 

H

POWER when the main zone is turned on.

• Press 

G

STANDBY when the main zone is turned off.

The VTRANSMIT indicator on the remote control lights 
up while the remote control is set to the Zone 2 mode.

• When the remote control is set to the Zone 2 mode, 

H

POWER, 

G

STANDBY, 

J

VOLUME +/–, 

L

MUTE, and 

the input selector buttons are set to control Zone 2. However, 
the rest of the remote control buttons remain in the main mode.

• The remote control automatically exits from the Zone 2 mode in 

the following cases:
– when you do not make any operations within 10 seconds after 

the remote control is set to the Zone 2 mode.

– when you press a remote control button other than 

H

POWER, 

G

STANDBY, 

J

VOLUME +/–, 

L

MUTE, 

and the input selector buttons.

Press H

POWER to turn on Zone 2.

Press one of the input selector buttons (A) to 
select the desired input source of Zone 2.

Press G

STANDBY to set Zone 2 to the standby 

Operate the following operations after activating the Zone 2 
operation mode.