Yamaha X-V2600 ユーザーズマニュアル

Use this menu to adjust the sound parameters.

Press k / n on the remote control to select 
Manual Setup and then press h.

Press k / n on the remote control to select 
Sound and then press h.

Select the desired parameters and then press 
h to access and adjust.

■ LFE Level (Low-frequency effect level)

Use to adjust the output level of the LFE (low-frequency 
effect) channel according to the capacity of your 
subwoofer or headphones. The LFE channel carries 
low-frequency special effects which are only added to 
certain scenes. This setting is effective only when this unit 
decodes Dolby Digital or DTS signals.
To access these parameters, select:

Manual Setup > Sound > LFE Level >
Control range: –20.0 to 0.0 dB
Control step: 1 dB

Speaker (Speaker low-frequency effect level)
Select to adjust the speaker LFE level.

Headphone (Headphone low-frequency effect 
level)
Select to adjust the headphone LFE level.

Depending on the settings of LFE Level, some signals may not be 
output at the SUBWOOFER jack.