Yamaha DSP-AX757SE ユーザーズマニュアル

In addition to controlling this unit, the remote control can also operate other A/V components made by YAMAHA and 
other manufacturers. To control other components, you must set up remote control with the appropriate remote control 
codes. This remote control also has a learn feature which allows the remote to acquire functions from other remote 
controls equipped with an infrared remote control transmitter.

■

The shaded areas below can be used to control this unit 
after pressing AMP to activate the AMP mode.

You can fix the remote permanently to AMP mode (fixed AMP 
mode) so that the shaded areas above always control this unit. 
This is useful, if you primarily want to use the remote control in 
AMP mode. To fix AMP mode, hold down AMP for at least 3 
seconds so that “A:___” appears in the display window.

To temporarily switch to component control mode, press AMP.
To cancel fixed AMP mode, hold down AMP for at least 3 
seconds.

■

The shaded areas below can be used to control other 
components. Each button has a different function 
depending on the selected component. Select the 
component you want to control by pressing an input 
selector button or SELECT k/n. The name of the selected 
component appears in the display window.

The buttons in the 
dotted lines control 
this unit in any 
mode (SYSTEM 
POWER, 
STANDBY, 
SLEEP, INPUT 
MODE, MULTI CH 
IN, VOL +/–, 
MUTE, 
STRAIGHT and 
input selector 
buttons).

Press AMP 
to control 
this unit.

Fixed AMP mode

Component control mode

A:DVD

DVD

The A/B and input selector 
buttons switch the function 
of the component control 
area below.
* Use the A/B buttons to 
control other components 
regardless of whether they 
are connected to this unit.
Factory setting:
A...LD player
B...CD recorder
SELECT k/n switches 
control to another 
component without 
changing the input source 
on this unit.

You can control up to 11 
different components by 
setting appropriate remote 
control codes (see 
page 69).