Yamaha AVENTAGE RX-A3020 ユーザーズマニュアル

PLAYBACK

➤ Playing back videos/audio in multiple rooms (multi-zone)

En

■

(RX-A3020 only)

Connect an HDMI-compatible device (such as a TV) to play back 
videos/audio at Zone2 or Zone4. If you connect an AV amplifier, you 
can enjoy multi-channel playback in another room (Zone4).

• To watch videos played back on a video device at Zone2 or Zone4, you need to 

connect the video device to the unit with an HDMI cable (p.41).

• We recommend that you disable HDMI Control on the playback devices connected 

to the unit.

• On-screen operations are not available for Zone4.

To assign the HDMI OUT 2 (ZONE OUT) jack to Zone2 or Zone4, set 
“HDMI OUT2 Assign” (p.127) in the “Setup” menu to “Zone2” or “Zone4”.

• When the HDMI OUT 2 (ZONE OUT) jack is assigned to Zone2, you can 

enable/disable the audio output from the HDMI OUT 2 jack by setting “Audio 
Output” (p.127) in the “Setup” menu to “On” or “Off” (default).

• You can also use speakers placed in Zone2 to output audio (p.32).

HDMI

HDMI

HDMI

The unit (rear)

HDMI OUT 2 
(ZONE OUT) jack

Zone4

Main zone

HDMI input

(Example: using a TV)

HDMI input

(Example: using an AV amplifier)

Zone2 or Zone4

• Videos/audio interruptions may happen in another zone when any of the 

following operations is performed.

– Tuning on/off a TV connected to the unit via HDMI or switching the TV input

– Enabling/disabling a zone output or selecting its input source

– Changing the sound mode or audio settings (such as “Extended Surround”)