JVC 0303NHMMDWJEIN ユーザーズマニュアル
23
English
Setting the Speakers Configuration
Quick Speaker Setup helps you to easily and quickly register the
speaker size and speaker distance according to your listening room
to create the best possible surround effect.
• You can also register each speaker’s information manually.
speaker size and speaker distance according to your listening room
to create the best possible surround effect.
• You can also register each speaker’s information manually.
For details, see page 25.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
On the front panel:
1. Press QUICK SPEAKER SETUP.
“SETUP” and “SPEAKERS?” appear on the display, then the
initial setting for the total number of the connected speakers
(channels) appears.
initial setting for the total number of the connected speakers
(channels) appears.
2. Turn MULTI JOG to select an appropriate
number of the connected speakers (speaker
channel number).
channel number).
The speaker channel number changes as follows.
• For the details of speaker channel number, see “Speakers
• For the details of speaker channel number, see “Speakers
(channels) number and size” on page 24.
* “6.0CH” is the initial setting.
Basic Settings
Some of the following settings are required after connecting and positioning your speakers while others will make
operations easier. You can use QUICK SPEAKER SETUP to easily set up your speaker configuration.
operations easier. You can use QUICK SPEAKER SETUP to easily set up your speaker configuration.
3. Press in MULTI JOG (PUSH SET).
“ROOM SIZE?” appears on the display, then the initial room
size setting appears.
size setting appears.
4. Turn MULTI JOG to select an appropriate room
size to match to your listening room.
The room size changes as follows.
• To select your appropriate room size, see “Room size and
• To select your appropriate room size, see “Room size and
speaker distance” on page 24.
* “LARGE” is the initial setting.
5. Press in MULTI JOG (PUSH SET).
“COMPLETE” appears on the display, then goes back to the
source indication.
• Speaker configuration settings now become active.
source indication.
• Speaker configuration settings now become active.
Note:
This procedure will not be completed if you stop in the middle of
the setting process.
the setting process.
Remote
NOT
VOLUME
LINEAR PCM
L
SUBWFR
R
ANALOG
SPEAKERS 1
VOLUME
LINEAR PCM
L
SUBWFR
R
ANALOG
SPEAKERS 1
VOLUME
L
SUBWFR
R
ANALOG
SPEAKERS 1
2.0CH
“ 2.1CH “ 3.0CH “ 3.1CH “ 4.0CH “
4.1CH
“ 5.0CH “ 5.1CH “ 6.0CH* “ 6.1CH “
7.0CH
“ 7.1CH “ (Back to the beginning)
VOLUME
LINEAR PCM
L
SUBWFR
R
ANALOG
SPEAKERS 1
VOLUME
LINEAR PCM
L
SUBWFR
R
ANALOG
SPEAKERS 1
VOLUME
LINEAR PCM
L
SUBWFR
R
ANALOG
SPEAKERS 1
SMALL
“ MID “ LARGE* “ (Back to the beginning)
VOLUME
LINEAR PCM
L
SUBWFR
R
ANALOG
SPEAKERS 1
RX-7032V
AUDIO/VIDEO CONTROL RECEIVER
23-28_7032[US]f.pm6
03.3.13, 4:31 PM
23