JVC CA-MXGB6 ユーザーズマニュアル
7
1
Press and hold the clamp of the AM terminal
on the rear of the unit.
on the rear of the unit.
2
Insert the end of the AM (MW) loop antenna
cord into the terminal.
cord into the terminal.
• If the AM (MW) loop antenna wire is
covered with vinyl, remove the vinyl by
twisting it as shown in the diagram.
twisting it as shown in the diagram.
3
Release the finger from the clamp.
4
Turn the AM (MW) loop antenna until you
have the best reception.
have the best reception.
To connect an outdoor AM (MW) antenna
When reception is poor, connect a single vinyl-covered wire
to the AM terminal and extend it horizontally. (The AM
(MW) loop antenna must remain connected.)
to the AM terminal and extend it horizontally. (The AM
(MW) loop antenna must remain connected.)
For better reception of both FM and AM (MW)
• Make sure the antenna conductors do not touch any other
terminals and connecting cords.
• Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
1
Press and hold the clamp of the speaker
terminal on the rear of the unit.
terminal on the rear of the unit.
2
Insert the end of the speaker cord into the
terminal.
terminal.
Match the colors (polarity): Blue (+) to blue (+) and black
(–) to black (–); red (+) to red (+) and black (–) to black
(–).
• If the wire is covered with vinyl, remove
(–) to black (–); red (+) to red (+) and black (–) to black
(–).
• If the wire is covered with vinyl, remove
the vinyl by twisting it as shown in the
diagram.
diagram.
3
Release the finger from the clamp.
IMPORTANT:
• Use only speakers with the same speaker impedance as
• Use only speakers with the same speaker impedance as
indicated by the speaker terminals on the rear of the
unit.
unit.
• DO NOT connect more than one speaker to one speaker
terminal.
MAIN SPEAKER
SUB WOOFER
4-8
[ ]
6
[ ]
R
R
L
L
-16
AM (MW) antenna
Vinyl-covered wire
(not supplied)
(not supplied)
AM (MW) loop antenna
(supplied)
(supplied)
Connecting Speakers
Speaker
cord
(red/black)
cord
(red/black)
From left
main
speaker’s
terminals
Speaker cord
(red/black)
Speaker cord
(blue/black)
(blue/black)
From right
main
speaker’s
terminals
From left
subwoofer’s
terminals
From right
subwoofer’s
terminals
1
Speaker cord
(blue/black)
Blue
Red
Black
ANTENNA
FM 75
AM
[ ]
1
Black
2, 3
2, 3
4
MXGB6&5[B]_01-08.p65
04.1.21, 5:59 PM
7