Integra DTR-10.5 ユーザーズマニュアル

 

120

 

This menu can be used when connecting to an Integra i.LINK (AUDIO)-ready device. 

 

Specify connecting condition on standby of the 
DTR-10.5.

 

To be left connected.

 

To be disconnected while the 

DTR-10.5 is on standby to save electricity.

 

Even when a DVD player is directly connected to the 
TV, the OSD screen of the DTR-10.5 can be displayed 
on the TV monitor if the DVD player is an Integra 
i.LINK (AUDIO)-ready device. In this case, use the 
i.LINK cable to connect the i.LINK (AUDIO) terminal 
on the DTR-10.5 and i.LINK (AUDIO) terminal on the 
DVD player.

 

Select this to block OSD screen 

display.

 

Select this to display the OSD screen on the left 

side of the TV monitor.

 

Select this to display the OSD screen on the 

right side of the TV monitor.

 

Select the name of the device that should display the 
OSD screen using the [

]/[

] cursor buttons if 

multiple Integra i.LINK (AUDIO)-ready devices are 
connected to the DTR-10.5. This item does not appear 
when “Disable” is selected in the OSD for DVD setting.
Select “No” when you do not want to select any device.

When listening in Zone 2, the same setting as above is 
available.

 

This menu allows you to enable/disable the i.LINK 
Selector Change function. When an i.LINK (AUDIO)-
enable device is used to playback, this function switches 
the input source to the one assigned to the device.

 

Enables the i.LINK Selector Change function.

 

 Disables the i.LINK Selector 

Change function.

 

This option automatically switches the i.LINK Audio 
Output of Integra’s DVD players. With this function 
enabled, audio signals of SACD will be output through 
i.LINK when no source is selected for Zone 2, or it will 

be output in analog format when any source is selected 
for Zone 2.

 

Enables the DVD Output for Zone 2 function.

 

 Disables the DVD Output for Zone 

2 function.