Insignia NS-STR514 ユーザーズマニュアル

Insignia NS-STR514 Stereo Receiver with Bluetooth

www.insigniaproducts.com

1 Strip away approximately 3/8” (10 mm) of 

insulation from each speaker wire and tightly 
twist the end together.

2 Loosen each speaker terminal on the back of the 

stereo receiver by turning it counterclockwise.

3 Insert the bare wire into the terminal, then 

tighten the terminal cap to securely connect it. 
Make sure that none of the wire insulation is 
under the terminal.

4 Make sure cables are secure by lightly pulling on 

them.

Connect speakers by matching the channel (left 
and right) and polarity (+ and -). If the 
connections are not correct, you will not hear 
any sounds from the speakers.

If the sound is unnatural and lacks bass, the 
speaker polarity is incorrect.

1 Connect the cable from the L/R AUDIO OUT 

jacks on the audio device to the L/R AUX IN (1 or 
2) jacks on the receiver.

•

We recommend that you use speakers with an 
impedance of 8 Ohms or more.

•

Do not let the bare speaker wires touch each 
other or any metal part of this receiver. Doing so 
may damage the receiver or speaker.

•

Do not touch the speaker wire terminals while 
the AC power cord is plugged in. Doing so could 
result in an electric shock.

If you have only one pair of speakers, connect them 
to the SPEAKER A terminals.

Speaker A

Speaker B

Left

Left

Right

Right

Back panel

Back panel

CD player

TV

MP3 player, 
smartphone, etc.

3.5 mm audio cable 
(not included)

Front panel

NS-STR514_14-0118_MAN_V1_ENG.book  Page 7  Thursday, March 6, 2014  10:53 AM