Intel DQ57TM, 10 Pack BLKDQ57TM-10PACK ユーザーズマニュアル
製品コード
BLKDQ57TM-10PACK
Installing and Replacing Desktop Board Components
37
Installing and Removing a Processor
Instructions on how to install the processor on the Desktop Board are given below.
Installing a Processor
CAUTION
Before installing or removing a processor, make sure the AC power has been removed
by unplugging the power cord from the computer; the standby power LED should not
be lit (see Figure 4 on page 30). Failure to do so could damage the processor and the
board.
by unplugging the power cord from the computer; the standby power LED should not
be lit (see Figure 4 on page 30). Failure to do so could damage the processor and the
board.
To install a processor, follow these instructions:
1. Observe the precautions in "Before You Begin" on page 33.
2. Unlatch the socket lever by pushing the lever down and away from the socket
1. Observe the precautions in "Before You Begin" on page 33.
2. Unlatch the socket lever by pushing the lever down and away from the socket
(Figure 7, A and B).
Figure 7. Unlatch the Socket Lever