ONKYO tx-sr444 ユーザーズマニュアル

Advanced Settings (Setup Menu)

Make settings for the on-screen display function on the TV when you use the setting menu, 

for example.

OSD Language

English

Select the on-screen display language.

Select from English, German, French, Spanish, 

Italian, Dutch, Swedish, Russian (European, 

Australian and Asian models), or Chinese 

(European, Australian, Taiwanese and Asian 

models).

Impose OSD

On

Set whether or not to display the information on 

the TV when the volume is adjusted or input is 

changed, for example.

"On": OSD displayed on the TV.

"Off": OSD not displayed on the TV.

● OSD may not be displayed depending on the 

input signal even if "On" is selected. If the 

operation screen is not displayed, change the 

resolution of the connected device.

Screen Saver

3 minutes

Set the time to start the screen saver. Select 

a value from "3 minutes", "5 minutes", "10 

minutes" and "Off".

Allows you to change the speaker configuration such as presence or not of subwoofer, 

crossover frequency, and so on. Settings are automatically configured if you use the 

Automatic Speaker Setup.

This setting cannot be selected if headphones are connected or audio is output from the 

speakers of the TV.

Change speaker settings such as the number of channels connected, and the type of height 

speakers connected.

Speaker Channels 7.1 ch

Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1 ch", 

"7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", or 

"5.1.2 ch" to suit the number of speaker channels 

connected.

Subwoofer

Yes

Set whether a subwoofer is connected or not.

"Yes": When subwoofer is connected

"No": When subwoofer is not connected

Height Speaker

Front High

Set the speaker type if height speakers are 

connected to the BACK/HEIGHT terminals.

Select "Front High", "Top Front", "Top Middle", "Top 

Rear", "Rear High", "Dolby Speaker (Front)", or 

"Dolby Speaker (Surr)" according to the type and 

layout of the connected speakers.

● If an item cannot be selected even though 

connection is correct, check that the settings 

in "Speaker Channels" matches the number of 

connected channels.