ONKYO TX-SR700/700E ユーザーズマニュアル
54
b. Digital Format
Sets the digital signal type to which priority is given during signal
detection at the selected digital terminal. The default setting is “All.”
If “----” is selected for this input source at the Digital Input setting,
then this setting will not appear. Although you can use this default
setting as is, you may change it as desired depending on the input
signal format or if you know that you will always be listening to a
certain input signal format from a particular input source.
Sets the digital signal type to which priority is given during signal
detection at the selected digital terminal. The default setting is “All.”
If “----” is selected for this input source at the Digital Input setting,
then this setting will not appear. Although you can use this default
setting as is, you may change it as desired depending on the input
signal format or if you know that you will always be listening to a
certain input signal format from a particular input source.
All: Select for automatic detection of the input signal format.
The input signal format (Dolby Digital, DTS, or PCM) used by
the selected input source is detected automatically to execute the
required decoding process.
The input signal format (Dolby Digital, DTS, or PCM) used by
the selected input source is detected automatically to execute the
required decoding process.
DTS: Select for DTS signal processing. The decoding process is
executed only when DTS signals are input.
executed only when DTS signals are input.
PCM: Select for PCM signal processing. The decoding process
is executed only when PCM signals are input.
is executed only when PCM signals are input.
Notes:
• If “All” is selected and a compact disc or LD is fast-forwarded
during playback, decoded PCM signals may produce a skipping
sound. In such cases, change the setting to “PCM.”
sound. In such cases, change the setting to “PCM.”
• If a DTS signal is not input when “DTS” is selected, the TX-
SR700/700E/600/600E will not automatically switch to analog
output even though “Auto” is selected with the AUDIO
SELECTOR button.
output even though “Auto” is selected with the AUDIO
SELECTOR button.
Notes on DTS:
• If you play a DTS-formatted CD or LD when the “PCM” setting
is selected on the TX-SR700/700E/600/600E, the DTS encoded
signal will not be decoded and noise will be output. This noise
could damage the amplifier and speakers. Therefore, be sure to
select “All” or “DTS” and use the digital input jacks (OPT or
COAX) to connect the DTS source.
signal will not be decoded and noise will be output. This noise
could damage the amplifier and speakers. Therefore, be sure to
select “All” or “DTS” and use the digital input jacks (OPT or
COAX) to connect the DTS source.
• If you play a DTS-formatted CD or LD when “All” is selected,
you may hear a noise for a short while until the DTS decoder
recognizes the DTS-encoded signal and starts operating. This is
not a malfunction.
recognizes the DTS-encoded signal and starts operating. This is
not a malfunction.
• If you press the pause or skip button on the player while playing
a DTS source, a short noise may be heard. This is not a
malfunction. In such cases, try playing the source in the “DTS”
selected.
malfunction. In such cases, try playing the source in the “DTS”
selected.
• The DTS indicator on the TX-SR700/700E/600/600E lights
while a DTS source is played. When playback finishes and the
DTS signal transmission stops, the TX-SR700/700E/600/600E
remains in DTS mode and the DTS indicator remains lit. This
prevents noise when you operate the pause or skip button on the
player. Therefore, if the source is immediately switched from
DTS to PCM, the PCM signal may not be played. In this case,
stop the playback of the source on the player for about three
seconds and then resume playback.
DTS signal transmission stops, the TX-SR700/700E/600/600E
remains in DTS mode and the DTS indicator remains lit. This
prevents noise when you operate the pause or skip button on the
player. Therefore, if the source is immediately switched from
DTS to PCM, the PCM signal may not be played. In this case,
stop the playback of the source on the player for about three
seconds and then resume playback.
• You may not be able to play some DTS source signals from
certain CD players and LD players even when you connect the
player to the TX-SR700/700E/600/600E digitally. This is
because the digital signal has been processed (such as the output
level, sampling frequency, or frequency response) and the TX-
SR700/700E/600/600E cannot recognize the signal as DTS data.
Therefore you may hear noise when you play a DTS source
while processing the signal.
player to the TX-SR700/700E/600/600E digitally. This is
because the digital signal has been processed (such as the output
level, sampling frequency, or frequency response) and the TX-
SR700/700E/600/600E cannot recognize the signal as DTS data.
Therefore you may hear noise when you play a DTS source
while processing the signal.
• The outputs for the VIDEO 1 OUT, VIDEO 2 OUT, and TAPE
OUT output analog audio signals. Do not record from CDs or
LDs that support DTS using these outputs. If you do, the DTS-
encoded signal will be recorded as noise.
LDs that support DTS using these outputs. If you do, the DTS-
encoded signal will be recorded as noise.
• If a CD or LD encoded in the DTS format is played back with
“PCM” selected, only noise will be produced. Always select
“All” or “DTS” when playing back DTS-encoded sources.
“All” or “DTS” when playing back DTS-encoded sources.
Input Setup
c. Multichannel
This setting is available when the input source is DVD.
Select “Yes” when using a DVD player with a 5.1-channel audio
output port. The default setting is “Yes.”
This setting is available when the input source is DVD.
Select “Yes” when using a DVD player with a 5.1-channel audio
output port. The default setting is “Yes.”
Note:
Press the AUDIO SELECTOR button to select Multich during
playback.
Press the AUDIO SELECTOR button to select Multich during
playback.
d. Component Video
If the video signal from a component is input to one of the
component video input banks (1 or 2), then which input source and
which component video input bank must be set here.
The Component Video setting is available when the input source is
DVD or VIDEO 1-4.
The default settings are given below.
If the video signal from a component is input to one of the
component video input banks (1 or 2), then which input source and
which component video input bank must be set here.
The Component Video setting is available when the input source is
DVD or VIDEO 1-4.
The default settings are given below.
Input source selected
Component video input
DVD
INPUT 1
VIDEO 1
INPUT 2
VIDEO 2
INPUT 2
VIDEO 3
INPUT 2
VIDEO 4
INPUT 2
e. IntelliVolume
This setting allows you to adjust for the volume differences between
your various input source components.
When switching input sources, you may find that the output level for
different components or input sources connected to the TX-SR700/
700E/600/600E is different even though the main volume setting is
the same. Under normal circumstances, you would then have to
change the volume setting each time you change the input source.
This Intelli Volume setting allows you to preset a volume level for
each input source separately so that when you do switch from one
input source to another, the TX-SR700/700E/600/600E adjusts the
volume accordingly and the volume stays the same. If the volume is
quieter than that of other sources, increase it with the cursor
button, and if it is louder than that of other sources, decrease it with
the cursor button.
This setting allows you to adjust for the volume differences between
your various input source components.
When switching input sources, you may find that the output level for
different components or input sources connected to the TX-SR700/
700E/600/600E is different even though the main volume setting is
the same. Under normal circumstances, you would then have to
change the volume setting each time you change the input source.
This Intelli Volume setting allows you to preset a volume level for
each input source separately so that when you do switch from one
input source to another, the TX-SR700/700E/600/600E adjusts the
volume accordingly and the volume stays the same. If the volume is
quieter than that of other sources, increase it with the cursor
button, and if it is louder than that of other sources, decrease it with
the cursor button.
The Intelli Volume can be adjusted between –12 and +12 decibels.