ONKYO 29400095 ユーザーガイド

58

This section explains how to record the selected input 
source to a component with recording capability, and 
how to record audio and video from different sources.

Notes:
• The surround sound and DSP listening modes cannot 

be recorded.

• Copy-protected DVDs cannot be recorded.
• Only analog inputs can be recorded.
• DTS signals will be recorded as noise, so don’t 

attempt analog recording of DTS CDs or LDs.

Audio sources can be recorded to a recorder (e.g., cas-
sette deck, CDR, MD) connected to the TV/TAPE OUT 
jack. Video sources can be recorded to a video recorder 
(e.g., VCR, DVD recorder) connected to the VCR/DVR 
OUT jack. See page 29 or 34 for hookup information.

Here you can record audio and video from completely 
separate sources, allowing you to overdub audio onto 
your video recordings. This function takes advantage of 
the fact that when an audio-only input source (i.e., TV/
TAPE, CD) is selected, the video input source remains 
unchanged.
In the following example, audio from the CD player con-
nected to the CD IN, and video from the camcorder con-
nected to the AUX INPUT VIDEO jack are recorded by 
the VCR connected to the VCR/DVR OUT jacks.

Use the input selector buttons to 
select the source that you want 
to record.
You can watch the source while record-
ing. The AV receiver’s MASTER VOL-
UME control has no effect on 
recording.

On the source component, start 
playback.
If you select another input source dur-
ing recording, that input source will be 
recorded.

Press the [CD] input selector button.
This selects the CD player as the audio source, but 
leaves the camcorder as the video source.

Start recording on the VCR and start play-
back on the camcorder and CD player.
The video from the camcorder and the audio from 
the CD player are recorded by the VCR.