ONKYO HT-RC470 ユーザーズマニュアル
Advanced Operations
En-69
■
Operating on the AV receiver
Tip
• The Whole House Mode function shares the input source of main
room with Multi Zone (
).
■
Operating on the remote controller
To control Zone 2/3, you must press ZONE2 or ZONE3
on the remote controller first.
on the remote controller first.
Adjusting the Volume for Zone 2
■
Operating on the remote controller
■
Operating on the AV receiver
If your Zone 2 speakers are connected to a receiver or
integrated amplifier in Zone 2, use its volume control to
adjust the volume.
integrated amplifier in Zone 2, use its volume control to
adjust the volume.
Muting Zone 2
■
Operating on the remote controller
Tip
• To unmute, press ZONE2 followed by MUTING again. Zone can
also be unmuted by adjusting the volume.
Note
• Only analog input sources are output from the ZONE 2/ZONE 3
LINE OUT jacks and ZONE 2 L/R terminals. Digital input
sources are not output. If no sound is heard when an input source
is selected, verify that the source is connected to an analog input.
sources are not output. If no sound is heard when an input source
is selected, verify that the source is connected to an analog input.
• You cannot select different AM or FM radio stations for your
main room and Zone 2/3. The same AM/FM radio station will be
heard in each room. Namely, if you have selected an FM station
for the main room, that station will also be output in Zone 2/3.
heard in each room. Namely, if you have selected an FM station
for the main room, that station will also be output in Zone 2/3.
• When you have selected NET or USB as input selector, the last
selector selected will be set for Main room and Zone 2/3.
• When Zone 2/3 is activated and its input selector is selected, the
power consumption of standby mode slightly increases.
• While Zone 2/3 is on,
u functions will not work.
• When setting the AV receiver to standby mode while Zone 2/3 is
active, the Z2 or Z3 indicator is dimly lit.
• “AUX”, “EXTRA1” and “EXTRA2” cannot be selected as input
sources for Zone 2/3.
• When “AUX”, “EXTRA1” or “EXTRA2” is the input source of
Main room and Zone 2/3 is set to share the same source, no sound
will be output from Zone 2/3.
will be output from Zone 2/3.
Controlling Multi Zone Components
1
To turn on Zone 2/3 and select an input source,
press
press
ZONE 2 or ZONE 3 followed by an input
selector button within 8 seconds.
Zone 2/3 turns on, the Z2 or Z3 indicator lights on the
AV receiver’s display.
Zone 2/3 turns on, the Z2 or Z3 indicator lights on the
AV receiver’s display.
To select the same source as the main room’s, press
ZONE 2 or ZONE 3 twice. “Z2 Sel: Source” or “Z3
Sel: Source” appears on the AV receiver’s display.
ZONE 2 or ZONE 3 twice. “Z2 Sel: Source” or “Z3
Sel: Source” appears on the AV receiver’s display.
2
To turn off Zone 2/3, press
ZONE 2 or ZONE 3
followed by
8ON/STANDBY within 8 seconds.
The zone is turned off.
ZONE 2 ZONE 3
MASTER VOLUME
8ON/STANDBY
Input selector buttons
1
Press
ZONE2 or ZONE3, then point the remote
controller at the AV receiver and press
8RECEIVER.
Zone 2/3 turns on, the Z2 or Z3 indicator lights on the
AV receiver’s display.
8RECEIVER.
Zone 2/3 turns on, the Z2 or Z3 indicator lights on the
AV receiver’s display.
2
To select an input source for Zone 2/3, press
ZONE2 or ZONE3, followed by an INPUT
SELECTOR button.
ZONE2 or ZONE3, followed by an INPUT
SELECTOR button.
3
To turn off Zone 2/3, press
ZONE2 or ZONE3,
followed by
8RECEIVER.
The zone is turned off.
1
Press
ZONE2.
2
Use
VOL
q/w.
1
Press
ZONE 2 (the Z2 indicator on the AV
receiver’s display flash).
2
Use
MASTER VOLUME control within 8 seconds.
8RECEIVER
ZONE2
ZONE3
INPUT
SELECTOR
SELECTOR
VOL
q/w
MUTING
1
Press
ZONE2 followed by MUTING.