Marantz SR4002/SR5002 ユーザーズマニュアル

Use this menu to select the input jack to be assigned 
to the input source.

 

 Select 

“INPUT SETUP” in SETUP MAIN 

MENU with 

3 or 4 cursor button, and press the 

ENTER button.

 1-1 INPUT SETUP

FUNC:MODE :DIG:HDMI:COMP
------------------------
TV  :

AUTO

 : 5 : -  : -

DVD :AUTO : 1 : 1  : 1
VCR :AUTO : 3 : 3  : 3
DSS :AUTO : 2 : 2  : 2
AUX1:AUTO : F : -  : -

MAIN          NEXT  EXIT

  * 

 

For the SR4002, “–” is displayed for TV DIG 
and VCR HDMI.

 1-2 INPUT SETUP

FUNC:MODE :DIG:HDMI:COMP
------------------------
TAPE:AUTO : - :    :  
CD/R:AUTO : 4 :    :  
AUX2:AUTO : - :    :  

MAIN  RETURN        EXIT

  To select the input source and MODE, press 

the 

3 or 4 cursor buttons.

 

 To 

select 

“DIG” “HDMI” or “COMP” for the input 

jack, press the 

1 or 2 cursor buttons.

 

  Select “AUTO” for input sources, for automatic 

detection of the digital input signal condition.

 

  If there is not a digital signal present, but there 

is an analog signal present, the analog signal 
will be played.

 

  Select “DIG”, when only a digital signal will be 

used. Select “ANA” for input sources for which 
no digital input jacks are used.

  To select the vdieo source, select “HDMI” or 

“COMP” by pressing the 

3 or 4 cursor buttons, 

and press the 

1 or 2 cursor buttons to select 

the vdieo source to be assigned .

 

  After you complete this portion of the set up, 

move the cursor to MAIN with the 

3 or 4 cursor 

buttons and press the ENTER button. 

• When the TUNER is fi xed to the analog input, you 

can not select any digital input.

•  When a DTS-LD or DTS-CD is playing, this setup is 

not available. This is to avoid noise being generated 
from the analog input.

• If “AUTO” is selected and a DVD, compact disc 

or LD is fast-forwarded during playback, decoded 
signals may produce a skipping sound. In such cases, 
change the setting to “DIG”.

After you have installed the unit, connected all the 
components, and determined the speaker layout, it 
is now time to perform the settings in the Speaker 
Setup menu for the optimum sound acoustics for 
your environment and speaker layout.
Before you perform the following settings, it is 
important that you first determine the following 
characteristics:

 

 Select 

“SPEAKER SETUP” in SETUP MAIN 

MENU with 

3 or 4 cursor button, and press the 

ENTER button.

Speakers are set up by selecting either MANUAL 
or AUTO using the 

1 and 2 cursor buttons. For 

operation when AUTO has been selected, see 
MRAC on page 29.

 2-1 SPEAKER SETUP

SPEAKER SETUP : 

MANUAL

 

MAIN          NEXT  EXIT

When setting the speaker size in the SPEAKER SIZE 
sub-menu, use the guidelines given below.
LARGE: 

The complete frequency range for the channel you 
are setting will be output from the speaker.

Frequencies of the channel you are setting lower 
than approx. 100 Hz will be output from the 
subwoofer.
If the Subwoofer is set to “NONE”, the setting of 
the front speakers will be fi xed  to  “LARGE,” and 
the sound will be output from both the left and 
right speakers.

 2-2 SPEAKERS SIZE

SUBWOOFER       : YES
FRONT L/R       : LARGE
CENTER          : SMALL
SURROUND L/R    : SMALL
SURR.BACK       : 2CH
SURR.BACK SIZE  : SMALL
LPF/HPF         : 100Hz
BASS MIX        : BOTH
MAIN          NEXT  EXIT

 

  To select the each speaker, press the 

3 or 4 

cursor buttons.

 

  To select the setting of each speaker size, 

press the 

1 or 2 cursor buttons.

 

  After you complete this portion of the set up, 

move the cursor to “NEXT” with the 

3 or 4 

cursor buttons and then press the ENTER 
button to go to the next page.

SUBWOOFER:
YES: 

Select when a subwoofer is connected.

Select when a subwoofer is not connected.

FRONT L/R
LARGE: 

Select if the front speakers are large.

Select if the front speakers are small.

• If “NONE” is selected for the Subwoofer setting, 

then this setting is fi xed to “LARGE.”

CENTER
NONE: 

Select if no center speaker is connected.

Select if the center speaker is large.

Select if the center speaker is small.

SURROUND L/R
NONE: 

Select if no surround left and right speakers are 
connected.

Select if the surround left and right speakers are 
large.

Select if the surround left and right speakers are 
small.

SURR. BACK
NONE: 

Select if no surround back left and right speakers 
are connected.

Select if the surround back left and right speakers 
are connected.

Select if the one surround back speaker is 
connected.
In this case, the audio signal is emitted form the 
Surround back L output terminal. 

SR4002-5002U DFU_01_E2_2.indd   28

SR4002-5002U DFU_01_E2_2.indd   28

07.7.9   2:47:31 PM

07.7.9   2:47:31 PM