Marantz SR7300 ユーザーズマニュアル

To temporarily silence all speaker outputs such as when interrupted
by a phone call, press the 

button on the front panel or 

button on the remote.
This will interrupt the output to all speakers and the head-phone jack,
but it will not affect any recording or dubbing that may be in progress.
When the system is muted, the display will show “

.

Press the 

button again to return to normal operation.

To program the SR7300 for automatic standby, press 

buton

on the remote.
Each press of the button will increase the time before shut down in the
following sequence.

The sleep time will be shown for a few seconds in the display on the
front panel, and it will count down until the time has elapsed.
When the programmed sleep time has elapsed, the unit will
automatically turn off.
Note that the 

indicator on the display will light up when the

Sleep function is programmed.
To cancel the Sleep function, press the 

button until the display

shows to “

” and the SLEEP indicator disappear.

Press the 

 button on the remote to turn on the NIGHT mode.

Selecting the Night Mode ON is effective in Dolby Digital only, and it
compresses the dynamic range.
This softens loud passages such as sudden explosions, to help
prevent disturbing others late at night.
To turn off the Night mode, press the 

 button again.

OFF

10

20

30

40

90

80

70

60

50