Pioneer VSX-819H-S ユーザーズマニュアル

En

• Make  sure the microphone is connected.
• Make  sure the subwoofer is on and the 

volume is turned up.

• See  below  for notes regarding background 

noise and other possible interference.

6 Wait for the test tones to finish.
A progress report is displayed on-screen while 
the receiver outputs test tones to determine the 
speakers present in your setup. Try to be as 
quiet as possible while it’s doing this. 

• For correct speaker settings, do not adjust 

the volume during the test tones. 

7 Confirm the speaker configuration.
The configuration shown on-screen should 
reflect the actual speakers you have.

• With  error messages (such as 

ambient noise) select RETRY after 
checking for ambient noise (see Other 
problems when using the Auto MCACC 
Setup on page 11).

If the speaker configuration displayed isn’t 
correct, use 

/ to select the speaker and 

/ to change the setting. When you’re 
finished, go to the next step.

If you see an error message (

ERR) in the right 

side column, there may be a problem with the 
speaker connection. If selecting 

RETRY 

doesn’t fix the problem, turn off the power and 
check the speaker connections.

ENTER.
If the screen in step 7 is left untouched for 10 
seconds and the 

ENTER button is not pressed 

in step 8, the Auto MCACC setup will start 
automatically as shown below.
A progress report is displayed on-screen while 
the receiver outputs more test tones to determine 
the optimum receiver settings for channel level, 
speaker distance, and Acoustic Calibration EQ.

Again, try to be as quiet as possible while this 
is happening. It may take 1 to 3 minutes.

You return to the System Setup menu.
The settings made in the Auto MCACC Setup 
should give you excellent surround sound from 
your system, but it is also possible to adjust 
these settings manually using the System 
Setup menu (starting on page 42).

1

1 •  Depending on the characteristics of your room, sometimes identical speakers with cone sizes of around 12 cm will end up 

with different size settings. You can correct the setting manually using the Speaker Setting on page 43.
• The subwoofer distance setting may be farther than the actual distance from the listening position. This setting should be 
accurate (taking delay and room characteristics into account) and generally does not need to be changed.

VSX-819H_RLF.book  10 ページ  ２００９年１月２０日　火曜日　午前１０時３６分