Pioneer VSX-820 ユーザーズマニュアル
The System Setup menu
06
47
En
English
Français
Deutsch
Nederlands
Italiano
Español
2
Select ‘Input Assign’ from the System
Setup menu.
3
Select ‘Component Input’ from the
Input Assign menu.
4
Select the number of the component
video input to which you’ve connected
your video component.
The numbers correspond with the numbers
beside the inputs on the rear of the receiver.
your video component.
The numbers correspond with the numbers
beside the inputs on the rear of the receiver.
5
Select the component that corresponds
with the one you connected to that input.
Select between
Select between
BD, DVD, TV, DVR or OFF.
• Use
/ and ENTER to do this.
• If you assign a component input to a
certain function, any component inputs
previously assigned to that function will
automatically be switched off.
previously assigned to that function will
automatically be switched off.
• Make sure you have connected the audio
from the component to the corresponding
inputs on the rear of the receiver.
inputs on the rear of the receiver.
6
When you’re finished, press RETURN.
You return to the Input Assign menu.
• For the assignment of the digital signal
inputs, see Choosing the input signal on
page 41.
page 41.
The Pre Out Setting
Specify either using the surround back
speaker or the front height speaker
connection with the
speaker or the front height speaker
connection with the
PRE OUT outputs. An
additional amplifier is required for the speaker
connection.
connection.
• Default setting:
Surr. Back
1
Press
on the remote control,
then press the SETUP button.
An on-screen display (OSD) appears on your
TV. Use
An on-screen display (OSD) appears on your
TV. Use
/// and ENTER on the remote
control to navigate through the screens and
select menu items. Press
select menu items. Press
RETURN to confirm
and exit the current menu.
2
Select ‘Pre Out Setting’ from the
System Setup menu.
3
Select which speaker to connect to the
PRE OUT outputs using
/.
•
Surr. Back – Connect the surround back
speaker.
speaker.
•
Height – Connect the front height speaker.
4
When you’re finished, press RETURN.
You return to the System Setup menu.
System Setup
1.Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Pre Out Setting
Return
3.Input Assign
Return
a.Component Input
3a.Component Input
Return
Component–1
BD
Component–2 [ DVD ]
RECEIVER
System Setup
1.Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Pre Out Setting
3.Input Assign
4.Pre Out Setting
Return
System Setup
1.Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Pre Out Setting
Return
4.Pre Out Setting
Return
Pre Out
Surr. Back
VSX-820_UCSMXCN_En.book 47 ページ ２０１０年４月１２日 月曜日 午後５時１９分 47