Sony STR-DA7ES ユーザーズマニュアル
Amplifier/Tuner Operation
29
GB
Direct tuning
Enter a frequency of the station directly by
using the remote.
For details on the supplied remote, refer to the
operating instructions supplied with the remote.
using the remote.
For details on the supplied remote, refer to the
operating instructions supplied with the remote.
STR-DA7ES
Use the supplied remote RM-TP1.
1
Touch RM SELECT.
The RM SELECT screen appears.
2
Touch AMP.
The screen for operiting the receiver
appears.
appears.
3
Touch TUNER.
The receiver swiches to the TUNER input.
4
Touch
B
to return to the RM SELECT
screen.
5
Touch TUNER in the RM SELECT
screen.
screen.
6
Touch FM/AM to select the FM or AM
band.
band.
You can also use the FM/AM button on the
receiver.
receiver.
7
Touch
b
to display screen 2/3.
8
Touch DIRECT.
9
Touch the numeric buttons to enter the
frequency.
frequency.
Example 1: FM 102.50 MHz
Touch 1
b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
(You don’t have to enter the last “0” when
the tuning scale is set to 10 kHz.)
the tuning scale is set to 10 kHz.)
Touch 1
b 3 b 5 b 0
If you’ve tuned in an AM station, adjust the
direction of the AM loop antenna for
optimum reception.
direction of the AM loop antenna for
optimum reception.
STR-DA4ES
Use the supplied remote RM-LP211.
1
Select “TUNER” from the FUNCTION
list to switch the function to TUNER.
list to switch the function to TUNER.
You can also use the FUNCTION control
on the receiver.
on the receiver.
2
Select “FM/AM” from the SUB menu to
select the FM or AM band.
select the FM or AM band.
You can also use the FM/AM button on the
receiver.
receiver.
3
Select “DIRECT TUNING” from the SUB
menu.
menu.
4
Select the numbers for the frequency
using the NUM menu.
using the NUM menu.
Example 1: FM 102.50 MHz
Press 1
b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
(You don’t have to enter the last “0” when
the tuning scale is set to 10 kHz.)
the tuning scale is set to 10 kHz.)
Press 1
b 3 b 5 b 0
If you’ve tuned in an AM station, adjust the
direction of the AM loop antenna for
optimum reception.
direction of the AM loop antenna for
optimum reception.
If you cannot tune in a station and
the entered numbers flash
Make sure you’ve entered the right frequency.
If not, repeat steps 3 and 4. If the entered
numbers still flash, the frequency is not used in
your area.
If not, repeat steps 3 and 4. If the entered
numbers still flash, the frequency is not used in
your area.