Sony STR-DA1800ES ユーザーズマニュアル

D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF 
02\4428194122_USFR\US05ENJ_STR-DA1800ES-CEL.fm

STR-DA1800ES
4-428-194-12(2)

When establishing a connection with this 
receiver, select the audio profile (A2DP, 
AVRCP) at the Bluetooth device. If the 
Bluetooth device does not support the AVRCP 
profile, you cannot perform playback or other 
operations with this receiver (page 84).

Select “STR-DA1800ES” on the 
Bluetooth device display.

If “STR-DA1800ES” is not displayed, 
repeat from step 1. 

If passkey* is required on the 
display of the Bluetooth device, 
enter “0000”.

Once pairing is completed, 
connect this receiver with the 
Bluetooth device.

Depending on the device, connection is 
automatically made along with the 
pairing. Once the connection is 
established, the device name appears on 
the TV screen and “BLUETOOTH” 
lights up on the display panel.

* Passkey may be called “Passcode”, “PIN code”, 

“PIN number” or “Password”.

• If pairing is not successful, “Cancel” appears on 

the TV screen. Repeat steps 1 to 6.

• The receiver only supports numerical passkey up to 

4 digits.

• You can pair up to 9 Bluetooth devices with this 

receiver. If 10th Bluetooth device is paired, the 
least recently connected device will be replaced by 
the new one.

• To pair with other Bluetooth devices, repeats steps 

1 to 6.

• To delete all pairing information, see “Clear 

Hold down BLUETOOTH after step 3. 
“Cancel” appears on the TV screen.

You can operate a Bluetooth device by 
connecting the receiver and a Bluetooth device 
using AVRCP.
Check the following before playing music:
– The Bluetooth function of the Bluetooth 

device is turned on.

– Pairing has been completed.

Press BLUETOOTH to select 
Bluetooth function.

The receiver automatically connects to 
the last connected Bluetooth device.
If you cannot connect with a last 
connected Bluetooth device, press 
BLUETOOTH on the receiver.

 

Once the connection is established, 
proceed to step 3.

Establish a connection from 
the Bluetooth device.

For details, refer to the operating 
instructions of your Bluetooth device.

Start playback from the 
Bluetooth device.

You can also press N on the remote 
control.

Press MASTER VOL +/– (or MASTER 
VOLUME on the receiver).

Depending on the type of Bluetooth device, 
you can adjust the volume using the controls of 
the Bluetooth device.

• Once the connection is established, the device 

name appears on the TV screen and 
“BLUETOOTH” lights up on the display panel.

• To disconnect from a Bluetooth device, press 

BLUETOOTH on the receiver. You can also 
disconnect from a Bluetooth device. For details, 
refer to the operating instructions of your Bluetooth 
device.

Playing music of a Bluetooth 
device