Sony DH840 ユーザーズマニュアル

D:\NORM'S JOB\SONY HA\SO0190\STR-DH730_DH830_PMRF 
01\4408151112_GB\GB07ADD_STR-DH730-CEL.fm

STR-DH830/STR-DH730

4-408-151-11(2)

 

 

 

 

 

 

 

 

 

• Check that the equipment is connected 

correctly to the audio input jacks for that 
equipment.

• Check that the cord(s) used for the 

connection is (are) fully inserted into the 
jacks on both the receiver and the 
equipment.

• Check the INPUT MODE (page 59).
• Check that the equipment is connected 

correctly to the HDMI jack for that 
equipment.

• You cannot listen to the Super Audio CD 

by connecting HDMI.

• Depending on the playback equipment, 

you may need to set up the HDMI setting 
of the equipment. Refer to the operating 
instructions supplied with each 
equipment.

• Be sure to use a High Speed HDMI cable 

when you view images or listen to sound, 
especially for the 1080p, Deep Color 
(Deep Colour) or 3D transmission.

• Sound may not be output from the receiver 

while the GUI appears on the TV screen. 
Press GUI MODE to select “GUI OFF”.

• Audio signals (format, sampling 

frequency, bit length, etc.) transmitted 
from an HDMI jack may be suppressed by 
the connected equipment. Check the setup 
of the connected equipment if the image is 
poor or the sound does not come out of the 
equipment connected via the HDMI cable.

• When the connected equipment is not 

compatible with copyright protection 
technology (HDCP), the image and/or the 
sound from the HDMI TV OUT jack may 
be distorted or may not be output. If this is 
the case, check the specification of the 
connected equipment.

• Set the image resolution of the playback 

equipment to more than 720p/1080i to 
enjoy High Bitrate Audio (DTS-HD 
Master Audio, Dolby TrueHD).

• The image resolution of the playback 

equipment may need to be at certain 
settings before you can enjoy Multi 
Channel Linear PCM. Refer to the 
operating instructions of the playback 
equipment.

• Make sure the TV is compatible with the 

System Audio Control function.

• If the TV does not have System Audio 

Control function, set the “Audio Out” 
settings in HDMI Settings menu to
– “TV+AMP” if you want to listen to the 

sound from the TV speaker and 
receiver.

– “AMP” if you want to listen to the 

sound from the receiver. 

• When you connect the receiver to a video 

equipment (projector, etc.), sound may not 
be output from the receiver. In this case, 
set the “Audio Out” to “AMP” in the 
HDMI Settings menu (page 67).

• If you cannot listen to the sound of the 

equipment connected to the receiver while 
TV input is selected on the receiver
– Be sure to change the input of the 

receiver to HDMI when you want to 
watch a program on the equipment 
connected via HDMI connection to the 
receiver.

– Change the TV channel when you want 

to watch a TV broadcast.

– Be sure to select the correct equipment 

or input you want when you watch a 
program from the equipment connected 
to the TV. Refer to the operating 
instructions of the TV on this operation.

• Check that the “A. DIRECT” is not being 

used.

• When using the Control for HDMI 

function, you cannot control the connected 
equipment using TV’s remote control.
– Depending on the connected equipment 

and TV, you may need to set up the 
equipment and TV. Refer to the 
operating instructions supplied with 
each equipment and TV.

– Change the input of the receiver to the 

HDMI input connected to the 
equipment.