Speco Technologies P120FACD/P240FACD ユーザーズマニュアル

PUBLIC ADDRESS AMPLIFIER  

P120FACD/P240FACD

Turn the volume, 

to choose ‘SET MIC1(MIC2) MUTE LVL’, Press ENTER,  . 

Choose MIN, MID, or MAX with the volume  , Press ENTER,  . 
- MIN : Attenuate level of the other channels by -6dB.
- MID : Attenuate level of the other channels by -12dB.
- MAX: Mute the other channels.

You can adjust the TEL-IN level. Turn the volume, 

to choose 'TEL-IN LEVEL', Press ENTER,  .

(VOL: 0(MIN) ~ 31(MAX), DEFAULT: MAX)

You can adjust the chime level. Turn the volume, 

to choose 'CHIME LEVEL', Press ENTER,  .

Adjust the level with the volume  .
(VOL: 0(MIN) ~ 31(MAX), DEFAULT: MAX)

Beep sound when you press a button on the front panel.
You can set it on or off. Turn the volume, 

to choose 'BEEP SOUND', Press ENTER,  .

Choose ON or OFF, Press ENTER,  .
- ON: Beep sound.
- OFF: Beep does not sound.

You can set the optional IR Remote Control function on or off.  Select IR REMOCON from the menu and press
ENTER  . Choose ON or OFF and press ENTER again  .
- ON: Enable the optional IR Remote Control function
- OFF: Disable the optional IR Remote Control function

All the key inputs except Power button can be locked by the KEY LOCK function.
Turn the volume, 

to choose 'KEY LOCK', Press ENTER,  . Choose Lock or Unlock, Press ENTER,  .

The is to set up ‘output volume level’ of an amplifier in case of EM broadcasting. At an initial setup, after
select EM broadcasting sourcce from no. 8 and give an input to EM terminal. And then, adjust an appropriate
volume with ®Í volume controller. (VOL: 50~70, DEFAULT: 60)

Choose SYSTEM INFO and press ‘ENTER’,  . You can check the current firmware version.