Marantz PM-11S1 ユーザーズマニュアル
8
CONNECTIONS
Connection Example 2: Basic Connection for 5.1 Multi-Channel Playback Using 3 PM-11S1
The three PM-11S1s are connected by FCBS. For the FCBS connection, prepare 3 portable audio connection cables with
monaural
monaural
⇔ monaural miniplugs or stereo ⇔ stereo miniplugs as described “ABOUT FCBS” on pg. 17. Set the ID numbers for
the PM-11S1 units as explained “HOW TO SET ID” on pg. 21. When the PM-11S1 of ID 1 is operated, those of ID 2 and ID 3 will
operate in sync. If using an active subwoofer, see the instruction manual that came with the subwoofer for connection and
positioning instructions.
operate in sync. If using an active subwoofer, see the instruction manual that came with the subwoofer for connection and
positioning instructions.
AC IN
3
1
2
3
1
2
AC IN
3
1
2
3
1
2
AC IN
3
1
2
3
1
2
FRONT R
FRONT L
SURROUND R
MULTI CHANNEL AUDIO OUT
SURROUND L SUB-WOOFER
CENTER
SACD multi-channel player, etc.
For front L/R speakers
Set PM-11S1 to ID 1.
Set SPEAKER A button on
front panel in ON position.
Set PM-11S1 to ID 1.
Set SPEAKER A button on
front panel in ON position.
Set to “STEREO”.
Set to “STEREO”.
Set to “STEREO”.
For center speaker or subwoofer
Set PM-11S1 to ID 2.
Set SPEAKER A button on front
panel in ON position.
Set PRE OUT button on front
panel in ON position.
Set PM-11S1 to ID 2.
Set SPEAKER A button on front
panel in ON position.
Set PRE OUT button on front
panel in ON position.
For surround speakers
Set PM-11S1 to ID 3.
Set SPEAKER A button on
front panel in ON position.
Set PM-11S1 to ID 3.
Set SPEAKER A button on
front panel in ON position.
To power outlet
To power outlet
To power outlet
L CH front speaker
R CH front speaker
To line input jack
Active subwoofer
Front center speaker
L CH surround speaker
R CH surround speaker