Madrigal Imaging N380S ユーザーズマニュアル
19
setup overview
The Nº380S Preamplifier has many provisions for custom-tailoring the system’s
operation to match your preferences. The consistent method for modifying any of
these settings is to enter a
operation to match your preferences. The consistent method for modifying any of
these settings is to enter a
setup
mode by:
• pressing and holding a button for several seconds;
• the setting is then modified, either by pressing a button or turning
• the setting is then modified, either by pressing a button or turning
the volume knob;
• and then the new preference is confirmed by pressing and holding
the original button again for several seconds.
This three-step process is simple and logical, yet provides positive feedback that
your change has been accepted and saved for future use. (If you allow the
preamp to “time out” after changing something, your change will still be saved.).
your change has been accepted and saved for future use. (If you allow the
preamp to “time out” after changing something, your change will still be saved.).
To facilitate operation in complex multisource systems, the Nº380S is capable of
displaying a wide variety of names for each of its six inputs. The available names
are listed below.
displaying a wide variety of names for each of its six inputs. The available names
are listed below.
available input names
NOT USED (any unused input)
ssp
ssp
Surround Sound Processor
EQ
Equalizer
DAT
Digital Audio Tape
VCR
Video Cassette Recorder
CAS
Cassette
RTR
Reel-To-Reel
DCC
Digital Compact Cassette
MD
Mini-Disc
CDR
Compact Disc, Recordable
CDI
Compact Disc, Interactive
SAT
Satellite
PH
Phono
LD
LaserDisc
CD
Compact Disc
TUN
Tuner
AUX
Auxiliary
DAC
Digital to Analog Converter
DMX
Digital Music Express™ (a cable radio system)
CDP
Proceed™ CD Processor
DVD
(depends on who you ask…)
DAP
Proceed DAP
No30
Mark Levinson Nº30(.5) Digital Audio Processor
No35
Mark Levinson Nº35 Digital Audio Processor
No36
Mark Levinson Nº36(S) Digital Audio Processor
No39
Mark Levinson Nº39 CD Processor
Each name is normally followed by a number corresponding to the number of
the input being used. (The exceptions being the names like “No30” and “No35”
for the corresponding Mark Levinson products.) Thus, a DAT in Input 3 would
normally display a
the input being used. (The exceptions being the names like “No30” and “No35”
for the corresponding Mark Levinson products.) Thus, a DAT in Input 3 would
normally display a
DAT3
. In this way, you can have more than one CD player, for
example, and still tell at a glance which one is selected.
There is also a special name to indicate that an input is
NOT USED
.