Classe Audio CA-5100 ユーザーズマニュアル

28

All specifi cations are accurate at the time of printing. Classé reserves the right to 
adjust specifi cations without notice.

„  Power output  

100W/ch continuous rms @ 8Ω

(all channels driven) 

190W/ch continuous rms @ 4Ω

„  Frequency response 

10Hz – 22kHz (+0/-0.1dB)

 

 

10Hz – 155kHz (+0/-3.0dB)

„  Phase 

better than -10° @ 22kHz

„  Signal-to-noise ratio 105dB

 

„  Channel separation 

better than 80dB @ 20kHz

„  Noise floor (FFT) 

all peaks less than -95dBV

 

„  Distortion (THD + noise) 

0.003% @ 8Ω

 

„  Voltage gain 29.1dB
„  Sensitivity 

1.0Vrms for rated output @ 8Ω

„  Input Impedance 100kΩ
„  Rated power consumption (as per IEC60065 para. 2.3.10) 575W
„  Idle power consumption 204W
„  Mains voltage specifi ed on rear panel
 

(cannot be changed by dealer or user).

„  Dimensions (not incl. controls or connectors) 

Width: 17.5” (445mm)

 

Height: 6.75” (171mm)

 

 

Depth: 18.5” (470mm)

„  Shipping weight 

88 lbs (40kg)

„  Net weight 

75 lbs (34kg)

For more information, see your Classé dealer, or contact: 

Classé Audio
5070 François Cusson
Lachine, Quebec
Canada  H8T 1B3
Telephone   +1 (514) 636-6384
FAX   

+1 (514) 636-1428

Internet:  

http://www.classeaudio.com

email: cservice@classeaudio.com

Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved.

i-Command™ is a trademark of Equity International, Inc. All rights reserved.

AMX

®

 is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.

Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.