Classe Audio SSP-30 MKII ユーザーズマニュアル
5.1
AUDIO SETUP:
These displays show that you have accessed the Audio setup sub-menu and
highlighted the Dolby/DTS setup. You can scan through the available choices by
pressing repeatedly the \/ and /\ buttons on the remote. When the feature you wish
highlighted the Dolby/DTS setup. You can scan through the available choices by
pressing repeatedly the \/ and /\ buttons on the remote. When the feature you wish
to adjust is highlighted press the < or > key to decrease or increase the level. When
you are satisfied with the level, put the cursor besides Exit and press the ENTER key.
you are satisfied with the level, put the cursor besides Exit and press the ENTER key.
Audio setup
Dolby/DTS setup
Dolby/DTS setup
Preset setup
Bass
Bass
----||---- 0dB
Treble ----||---- 0dB
LFE level 0dB
Reverb Dry
Exit
LFE level 0dB
Reverb Dry
Exit
Audio setup
Dolby/DTS setup
Dolby/DTS setup
Panel Display
TV Display
5.1.1 Audio setup:
The Audio setup includes Dolby/DTS setup, Preset setup, Bass and Treble controls, LFE (Low
Frequency Effects) level and Reverb wetness adjustment.
• Treble and Bass settings can be adjusted plus or minus 12dB in 1dB steps.
• The LFE (Low Frequency Effects) channel contains only low frequency signals. It is the “0.1” of the 5.1 or 7.1
• The LFE (Low Frequency Effects) channel contains only low frequency signals. It is the “0.1” of the 5.1 or 7.1
channel digital surround signal. The LFE channel is present only with Dolby Digital, DTS and DTS-ES sources.
The LFE level can be set from –10dB to 0dB.
The LFE level can be set from –10dB to 0dB.
• The Reverb wetness adjustment controls the amount of effect of the ambient music modes.
5.1.2 Dolby/DTS setup:
This sub menu permits the following adjustments: PLII Panorama (ON/OFF), PLII Center
Width adjustment (Min to Max), PLII Dimension adjustment (0 to 3)and Neo:6 Center Image adjustment
(Min to Max).
• PL II panorama setting affects the surround sound field. If the PL II panorama is “On”, the sounds from the
front channels are spread to the surround channels.
• PL II width controls the width of the front surround field.
• PL II dimension controls the front surround balance of the sound field.
• PL II dimension controls the front surround balance of the sound field.
5.1.3 Preset setup:
The Presets are used to change temporarily the bass, treble and levels of the center, surround
and subwoofer speakers. The Preset setup allows adjusting of five different presets, which can be assigned to
any source in Source setup.
any source in Source setup.
• Treble and Bass settings replace the settings in the Audio setup
• Center, Surround, and Subwoofer settings are added to values in the Level setup.
• Center, Surround, and Subwoofer settings are added to values in the Level setup.
18