Cary Audio Design CAA 1 ユーザーズマニュアル

 

 

7

Operating this component is a simple procedure. Each unit is designed for long term stability in 

virtually any home operating situation. However, if the unit is operated outside the parameters 

outlined in this owner's manual, damage may result. Please read this manual carefully before 
putting your new component into operation. 

 

Balanced Inputs:  

Accepts right-channel and left-channel balanced signals from the 

preamplifier with balanced outputs. 

 

Single-ended Inputs:  

Accepts right-channel and left-channel (single-ended) inputs from 

the preamplifier. 

 

Loudspeaker Binding Posts:  Connect + (positive) binding post on the CAA 1 to the positive inputs 

on the associated loudspeaker. 
Connect – (negative) binding post on the CAA 1 to the negative 

inputs on the associated loudspeaker. 

 

 

SWITCHING ON 
 

•  Press once to turn the power “ON”. 

•  Press again to set to the "OFF" position and turn the power off. The amplifier will enter 

into Standby and the blue LED will light. 

 

POWER ON indicator 

•  The backlit etched Crystal 3D logo lights when the power amplifier is turned ON. 

 
STANDBY indicator 

•  The indicator lights when the power amplifier is switched to standby mode. 

 

BREAKING-IN  

•  The CAA 1 requires at least 100 hours of continuous operation after it is first turned on 

to sound its best. This gives the materials in various circuit components a chance to 

"form" so audio signals achieve greater definition, smoothness and transparency.  

 
Although the unit will sound spectacular when you first operate it, you will find it 

worthwhile to listen again after a few days and you'll discover details in your music you 

may not have noticed were there.