ONKYO A-9070 ユーザーズマニュアル

En

• Push plugs in all the way to make good connections (loose connections can cause noise or 

malfunctions). 

• To prevent interference, keep audio cables away from power cords and speaker cables.
• The integrated amplifier’s optical digital jacks have shutter-type covers that open when an 

optical plug is inserted and close when it’s removed. Push plugs in all the way.

• To prevent shutter damage, hold the optical plug straight when inserting and removing.
• Do not use digital audio signals other than PCM.

*

An analog audio cable can be used instead of a coaxial cable. However, we recommend that 
you use a coaxial or a composite video cable.

• To reduce noise, do not tie signal cables together with the power 

cable. Wire them so that they are away from each other. 

• Depending on the country, the integrated amplifier may be 

polarity-sensitive. In this case, plug the power cord in a way that 
provides the best sound quality.

• Never disconnect the power cord from the integrated 

amplifier while the other end is still plugged into a wall 
outlet. Doing so may cause an electric shock. Always disconnect 
the power cord from the wall outlet first, and then the integrated 
amplifier.

• Turning on the integrated amplifier may cause a momentary 

power surge that might interfere with other electrical equipment 
on the same circuit. If this is a problem, plug the integrated 
amplifier into a different branch circuit.

• Do not use a power cord other than the one supplied with the 

integrated amplifier. The supplied power cord is designed 
exclusively for use with the integrated amplifier and should not 
be used with any other equipment.

Optical digital audio

Optical digital connections allow you to enjoy digital sound such as 
PCM. The maximum sampling rate for PCM input is 96 kHz/24 bit, 
2ch.

Coaxial digital audio

*

Coaxial digital connections allow you to enjoy digital sound such as 
PCM. The maximum sampling rate for PCM input is 192 kHz/24 bit, 
2ch.
The integrated amplifier provides 75-ohm impedance matching.

Analog audio (RCA)

Analog audio connections (RCA) carry analog audio.

u

To use 

u (Remote Interactive), you need to connect your Onkyo 

CD Player, Network Tuner, or RI Dock to the integrated amplifier 
with an 

u cable.

Orange

White

Red

Right!

Wrong!

Supplied power cord

To an AC wall outlet
(Plug type varies from 
country to country.)