ONKYO A-1VL ユーザーズマニュアル

 

6

 

1

 

This button is used to set the A-1VL to On or Off.

 

2

 

This indicator lights up when the A-1VL is ON. 
While this indicator is illuminated, you can operate 
the A-1VL with the remote controller.

 

3

 

This indicator lights up when the Muting function is 
set.

 

4

 

This control is used to set the volume of the A-1VL.

 

5

 

This sensor receives control signals from the remote 
controller.

 

6

 

This control is used to select following input 
sources: CD, LINE 1, LINE 2, TUNER and 
PHONO.

 

7

 

Turns on or off the DIRECT function. When you 
use the A-1VL as a power amplifier, turn on the 
DIRECT function.

 

1

 

These analog inputs can be used to connect a
turntable with a moving-magnet cartridge.

 

2

 

These inputs can be used to connect a tuner.

 

3

 

These inputs can be used to connect a CD player 
with analog outputs.

 

4

 

If you use the A-1VL as a preamp, these analog pre-
out can be connected to the inputs on a power amp.

 

5

 

If you use the A-1VL as a power amp, these analog 
inputs can be connected to the outputs on a separate
preamp.

 

6

 

These terminal posts are for connecting your speakers.

 

7

 

This screw is for connecting a turntable’s ground wire.

 

8

 

These inputs can be used to connect a TV or other 
component with analog outputs.

 

9

 

These analog inputs can be used to connect a 
cassette or MD recorder.

 

0

 

This selector can be used to set the speaker imped-
ance values according to the speakers you use.

 

A

 

The supplied power cord should be connected here.