ONKYO 9555 ユーザーズマニュアル

7

Front & Rear Panels—Continued

A

Grounding terminal
This terminal is for connecting a turntable’s ground 
wire.

B

PHONO (MM) input
This analog audio input is for connecting a turntable 
with a moving-magnet cartridge.

C

SPEAKERS A
These terminal posts are for connecting speaker set 
A.

D

SPEAKERS B
These terminal posts are for connecting speaker set 
B.

E

AC INLET
This connector is for connecting the supplied power 
cord (see page 5).

F

CD input
This analog audio input is for connecting a CD 
player’s analog audio output.

G

TUNER input
This analog audio input is for connecting a tuner’s 
analog audio output.

H

TAPE IN/OUT
This analog audio input and output are for connect-
ing a cassette deck with an analog audio input and 
output.

I

MD IN/OUT
This analog audio input and output are for connect-
ing an MD recorder with an analog audio input and 
output.

J

HDD IN
This analog audio input is for connecting a compo-
nent’s analog audio output (RI Dock, etc.).

K

LINE input
This analog audio input is for connecting a compo-
nent’s analog audio output (TV, etc.).

L

MAIN IN (A-9755 only)
This analog audio input is for connecting a separate 
preamp when you want to use the A-9755 as a 
power amplifier.

Caution: 
Do not connect a component that does not have an 
output volume control, such as a CD player, 
because the sound will be output at maximum vol-
ume and may damage the A-9755 and your speak-
ers.

M

These 

 (Remote Interactive) jacks can be con-

nected to the 

 jacks on your other Onkyo audio 

components. The A-9755/A-9555’s remote control-
ler can then be used to control all of your compo-
nents. To use 

, you must make an analog audio 

connection between the A-9755/A-9555 and each 
component.

1 2

4

5

3

8

7

90AB C

6

See pages 10–13 for connection information.