ALTINEX MT108-103 ユーザーズマニュアル
MULTITASKER
400-0162-003
2
PRECAUTIONS / SAFETY WARNINGS
1
Please read this manual carefully before using your
MT108-103 and keep it handy for future reference.
These safety instructions are to ensure the long life
of your MT108-103 and to prevent fire and shock
hazards. Please read them carefully and heed all
warnings.
MT108-103 and keep it handy for future reference.
These safety instructions are to ensure the long life
of your MT108-103 and to prevent fire and shock
hazards. Please read them carefully and heed all
warnings.
1.1 GENERAL
•
Qualified ALTINEX service personnel or its
authorized representatives must perform all
service.
authorized representatives must perform all
service.
1.2 HANDLING
•
Handle the MT108-103 carefully. Dropping or
jarring can damage the card.
jarring can damage the card.
•
The MT108-103 contains components that are
sensitive to electrostatic discharge (ESD).
sensitive to electrostatic discharge (ESD).
Always use ESD safety precautions when
touching the card.
touching the card.
•
To prevent fire or shock, do not expose this unit
to water or moisture. Do not place the
MT108-103 in direct sunlight, near heaters, or
heat-radiating appliances, or near any liquid.
Exposure to direct sunlight, smoke, or steam can
harm internal components.
to water or moisture. Do not place the
MT108-103 in direct sunlight, near heaters, or
heat-radiating appliances, or near any liquid.
Exposure to direct sunlight, smoke, or steam can
harm internal components.
•
Do not pull any cables that are attached to the
MT108-103.
MT108-103.
1.4 CLEANING
•
Clean only the connector area with a dry cloth.
Never use strong detergents or solvents such as
alcohol or thinner. Do not use a wet cloth or
water to clean the card. Do not clean or touch
any component or PCB.
Never use strong detergents or solvents such as
alcohol or thinner. Do not use a wet cloth or
water to clean the card. Do not clean or touch
any component or PCB.
1.5 FCC NOTICE
•
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
•
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and if
not installed and used in accordance with
instructions found herein, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at his own expense.
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and if
not installed and used in accordance with
instructions found herein, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at his own expense.
•
Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could void
the user’s authority to operate the equipment.
expressly approved by ALTINEX, Inc. could void
the user’s authority to operate the equipment.