ALTINEX DA1921SX ユーザーズマニュアル
DISTRIBUTION AMPLIFIERS
400-0155-002
7
7
Cause 3:
The DA1921SX has a problem.
Solution:
If there is AC power to the adapter
and the LED still does not turn on,
the DA1921SX or the power adapter
may require service. Call ALTINEX
at (714) 990-2300.
and the LED still does not turn on,
the DA1921SX or the power adapter
may require service. Call ALTINEX
at (714) 990-2300.
8.2 LED IS NOT GREEN
Cause 1:
There is no power.
Solution:
Disconnect the video input from the
DA1921SX and verify the LED is ON
and RED indicating power is
present. Reconnect the computer's
video output. If the LED is still not
GREEN see Cause 2.
DA1921SX and verify the LED is ON
and RED indicating power is
present. Reconnect the computer's
video output. If the LED is still not
GREEN see Cause 2.
Cause 2:
There is no Sync signal.
Solution:
Verify the computer output is
operating correctly by connecting it
directly to the local monitor,
bypassing the transmitter and
receiver. If the display is good, call
ALTINEX at (714) 990-2300.
operating correctly by connecting it
directly to the local monitor,
bypassing the transmitter and
receiver. If the display is good, call
ALTINEX at (714) 990-2300.
8.3 NO REMOTE IMAGE
Cause 1:
The source has a problem.
Solution:
Check the image on the local
monitor and verify the quality is
good. If the local image is good, see
Cause 2.
monitor and verify the quality is
good. If the local image is good, see
Cause 2.
Cause 2:
Video equalization required.
Solution:
Adjust the VIDEO EQUALIZATION
on the DA1921SX. Long cable runs
may require adjustment on both the
DA1921SX and the DA1920SX.
on the DA1921SX. Long cable runs
may require adjustment on both the
DA1921SX and the DA1920SX.
In general, cable runs less then 50
feet require little or no video
equalization and should be set to
minimum. Longer cable runs will
require equalization on both the
transmitter and receiver.
feet require little or no video
equalization and should be set to
minimum. Longer cable runs will
require equalization on both the
transmitter and receiver.
8.4 REMOTE IMAGE QUALITY IS POOR
Cause 1:
The source has a problem.
Solution:
Check the image on the local
monitor and verify the quality is
good. If the local image is good, see
Cause 2.
monitor and verify the quality is
good. If the local image is good, see
Cause 2.
Cause 2:
Video equalization required.
Solution:
Adjust the VIDEO EQUALIZATION
on the DA1921SX. Long cable runs
may require adjustment on both the
DA1921SX and the DA1920SX. If
the image is still not correct, call
ALTINEX at (714) 990-2300.
on the DA1921SX. Long cable runs
may require adjustment on both the
DA1921SX and the DA1920SX. If
the image is still not correct, call
ALTINEX at (714) 990-2300.
ALTINEX POLICY
9
9.1 LIMITED WARRANTY/RETURN POLICY
Please see the Altinex website at
www.altinex.com
for details on warranty and
return policy.
9.2 CONTACT INFORMATION
ALTINEX, INC
592 Apollo Street
Brea, CA 92821 USA
TEL: 714 990-2300
TOLL FREE: 1-800-ALTINEX
WEB:
www.altinex.com
E-MAIL:
solutions@altinex.com