Yamaha YSP-4300 ユーザーズマニュアル

If sound from the left and right channels is unnatural, first adjust 
the volume of each channel (

☞p. 33, 62).

If this does not resolve the problem, adjust left- and right-channel 
image location.
Use to adjust the direction from which the front left and right 
channel sound is heard so that each sound can be heard closer to 
the center channel.
Use this feature to redirect audio signals if the sound coming 
from the front left and right channels seems unnatural.
You can adjust this parameter only when “5Beam/Plus2”, 
“5Beam” or “3Beam” is selected in “Changing the audio output 
method for surround playback” (

Sub menu: ADJUSTMENT
Select “ON” to configure the sound direction.
Selectable item: OFF*, ON

Sub menu: 5.1ch, 7.1ch, AUTO*
Specify the sound beam output method (5.1ch, 7.1ch, AUTO).
When “AUTO” is selected, sound beams are output from the 
appropriate number of channels based on input signal as follows.

- 2- or 5.1-channel input: 5.1-channel output
- 6.1- or 7.1-channel input: 7.1-channel output

The available sound beam output methods vary depending upon 
the current “CHANNEL OUT” setting (

☞p. 36).

The higher the percentage, the louder the output from the 
center channel.
Control range: 0%* to 95%

The higher the percentage, the louder the output from the 
center channel.
Control range: 0%* to 95%