Phase Technology Cinemicro One ユーザーズマニュアル

SUBWOOFER PLACEMENT

Subwoofer placement is less critical, because the frequencies they reproduce are omni directional. This means the

human ear doesn’t perceive these low frequencies as coming from a specific direction, enabling placement of a

subwoofer virtually anywhere in the listening room.

It’s best, however, to keep a subwoofer within the sound field of the other speakers. The closer the subwoofer is

to a wall, the louder and more intense its bass output will be: this effect is even stronger when the sub is placed in

or near a room’s corner. If using two subwoofers, start by placing them next to the front left and right speakers, in

both front corners or one in the corner and one 1/3 of the way along the front wall from the corner. Each room is

different. Experiment with these options or try other locations until you get the best results. If you must choose a

less-than-ideal position, the output level of Phase Technology powered subwoofers is adjustable to compensate for

your listening environment.

SPEAKER CONNECTIONS

The following instructions apply whether you are using a separate amplifier or Home Theater receiver. For simplicity

we will use the term “amplifier” throughout this manual to mean both. With system power off and your amplifier

unplugged, please follow these steps:

Special Note: Observe Speaker Polarity Carefully!

Every cable, speaker and amplifier is clearly marked to show their positive (+) and negative (-) terminals. Amps and

speakers may use some combination of these symbols and/or colors to indicate positive (usually red) and negative

(usually black or white) connections. One strand of your cable will also be ridged and/or marked with a colored line

or other indicator on the positive side. For proper polarity and, thus, ideal system performance, always connect the

positive side of the cable to the positive terminals on your speakers and amplifier and the negative side of the cable

to the negative terminals.

Front Speakers: The pair of front speaker connections (left and right) on your amplifier will be labeled “Front” or

“Main.” Connect the speaker cables for your left and right front speakers using these terminals and then connect

the cables to the front satellites. Observe positive and negative polarities.

Center Speaker: The center speaker connections on your amplifier will be labeled “Center” or “Center Channel.”

Connect the speaker cables for your center channel speaker using these terminals and then connect the cables to

the center speaker. Observe positive and negative polarities.

Surround Speakers: The pair of surround connections (left and right) on your amplifier will be labeled “Surround.”

Connect the speaker cables for your left and right surround speakers using these terminals and then connect the

cables to surround satellite speakers. Observe positive and negative polarities.

Rear Speakers (optional purchase): The pair of rear connections (left and right) on your amplifier will be labeled

“Rear.” Connect the speaker cables for your left and right rear speakers using these terminals and then connect the

cables to the rear satellite speakers. Observe positive and negative polarities.

6.1-7.2 and Additional Subwoofers: Individual CineMicro

One

satellite speakers and subwoofers are offered

separately. One or two extra satellites can expand your 5.1 system into a 6.1 or 7.1 system. Adding an extra subwoofer

will expand your system to a 5.2, 6.2, or 7.2 system. Ask your Phase Technology dealer for details.

Please refer to the diagram on the following page for speaker connections.

Amplifier Panel

Left

Front

Left

Surr.

Center

Channel

Right

Front

Right

Surr.

SUB OUT

Subwoofer

Left

Front

Center Speaker

Right

Front

Right

Surround

Left

Surround

Line Input

MOUNTING THE CINEMICRO

ONE

ON A WALL

The four satellites and center channel include keyhole-style inserts for on-wall mounting. Use an 8 mm screw in a

drywall anchor capable of holding 2-3 times the weight of the speaker in the location you wish to mount the speaker.

Leave the screw head about 1/4” out of the anchor, then slide the keyhole insert over the screw.

Additionally, the four satellite and one center channel speakers feature M5 (5 mm) threaded inserts mounted on the

rear or bottom of the speakers for use with standard wall mounting brackets (available from third party vendors).

TABLE TOP OR SHELF PLACEMENT

Included with your CineMicro speakers are self adhesive bumpers that can be used on the bottoms of the speakers

to protect the finish when placing it on a shelf or table top. Simply peel off four of the bumpers from the backing

paper and apply the four bumpers to the bottoms of each of the satellite speakers. To keep the center channel

speaker from rocking and to level the speaker, two angled plastic feet are included that can be attached to the

bottom of the speaker cabinet. Use to two supplied screws to attach the feet to the left and right threaded inserts

in the bottom of the cabinet. Two extra bumpers are also included to apply to the bottom of the speaker to protect

the finish of the cabinet.