Electro-Voice EVA-1151D プリント

EVA-1151D

Single 15”

Subwoofer

Line-Array Module

General Description:

Key Features:

• Compact design rigs with EVA full-range modules
• Hidden suspension hardware (included) is

aesthetically pleasing

• Three finishes available — standard, PI, and

fiberglass

• 98 dB sensitivity
• 500 W continuous power capacity (2,000 W peak)
• 125/131 dB maximum SPL (continuous/peak)
• EVADA (EVA Design Assistant) software tool

available

The Electro-Voice EVA-1151D is a high-power, front-loaded sub-

woofer module for use with EVA full-range line-array modules. It

can be arrayed on top of an EVA full-range array using an EVA-

SG2 standard or EVA-EG2 extended grid, or behind a full-range

EVA array using the EVA-CG coupler grid, which allows subs to

be flown in the array without increasing trim height. Up to three

EVA-1151D subwoofer modules and five full-range modules may

be flown in this configuration from a single hang point. The unique

acoustic and integrated rigging design of the EVA series also al-

lows for construction of vertical arrays up to eight modules high

using any combination of EVA-1151D and/or EVA-2082S modules.

For rigging information please refer to the EVA User Manual avail-

able at www.electrovoice.com.

The EVA-1151D has been designed exclusively for fixed installa-

tion applications. The DVX3159A 15” woofer is specially designed

for subwoofer duty to provide reliable low-frequency performance

with solid impact and low distortion at high sound pressure levels.

The enclosure is constructed of 18-mm 13-ply birch plywood re-

inforced with internal steel rigging top to bottom and coated with

EVCoat

for durability and professional appearance. PI versions

are available for indirect outdoor exposure or fiberglass (FG)

versions for severe exposure applications. PI and FG versions

include the CDG dual-gland-nut input panel cover and stainless

steel three-layer grille. The innovative input panel provides a

choice of Phoenix/Euroblock connectors, optional CDNL4 cover

plate with dual NL4-type connectors or the CSG single-gland-nut

plate for use with cable. Enclosure side-panel covers conceal all

suspension hardware and provide a smooth, monolithic appear-

ance. In keeping with the modular building-block philosophy

behind EVA series loudspeakers, intermodule tie plates included

with the EVA-1151D provide for splays of 0° or 5° between

subwoofer modules to help accommodate the wide variety of

array configurations possible, including stand-alone subwoofer

arrays. For array design please refer to the EVA Design Assistant

(EVADA) software available at www.electrovoice.com.

Half-space measurement.

AES-1984, tested for eight hours.

Arithmetic average, 55 - 110 Hz, half-space measurement.

Technical Specifications:

Freq. Response

(-3 dB): 48 Hz - 250 Hz

Freq. Range

(-10 dB): 35 Hz - 250 Hz

Rec. High-Pass Frequency: 35 Hz, 24-dB-per-octave Butterworth

Axial Sensitivity

: 98 dB (1 W/1 m)

Max. Calculated SPL

: 131 dB

Power Handling

: 500 W continuous, 2000 W peak

Crossover Frequency: 80 - 125 Hz, 100 Hz typical

LF Transducer: DVX3159A, 15” (381 mm) driver

Impedance: 8 ohms (nominal), 5.3 ohms (min.)

Connectors: Dual 4-pin 10

AWG Phoenix/

EuroBlock

screw-terminals

PI/FG Versions -

CDG gland-nut

input panel cover

included

Enclosure: 13-ply weather-

resistant birch

with EVCoat

FG Version - 13-ply

weather-resistant

birch with fiber-

glass finish

Grille: 16 GA powder-

coated galvanneal

PI/FG Versions -

Stainless steel

with hydrophobic

cloth

Environmental: IEC 60529 IP55 for PI and FG versions

Suspension: EVA-SG2 grid (sold separately)

EVA-EG2 grid (sold separately)

EVA-CG grid (sold separately)

EVA-GXB extra spreader bar (sold

separately)

Dimensions (H x W x D): 23.5” x 23.5” x 18.2”

(597 mm x 597 mm x 462 mm)

Net Weight: 89.1 lb (40.4 kg)

Shipping Weight: 98.9 lb (44.9 kg)